Tamiya USA TAM47308

Tamiya brand Electric Powered, Racio Controlled
1/10 scale Tamiya Golf Mk.1 Racing Group 2 On-Road Car Kit.

Chassis: M5 resin monocoque design
Drive: Front wheel, double cardan driveshafts
Differential: Gear type
Motor: 540 size, brush equipped
ESC: Tamiya TBLE-02
Shocks: Friction, not oil-filled
Pinion Gear: 20T
Motor Plate: 3mm thick
Suspension: Four wheel independent double wishbone
Tires: Treaded 60D radial 0.98 (25mm) wide, 2.3 (59mm) diameter
with foam inserts
Wheels: Gray plastic, 0.94 (24mm) wide, 1.5 (38mm) diameter
Body: Clear polycarbonate construction with white plastic grille
and driver figure
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Three piece tie-rod linkage

Golf Mk.1 1/10 scale Kit with Clear Body, Brushed Motor,
ESC, Tires with Foam Inserts, Wheels, Decals and Instruction Sheet

Radio: 2-channel with standard size servo
AA Batteries: Number depends on transmitter
Battery: 6-cell stick with standard connector
Battery Charger: Peak type recommended
Polycarbonate safe paint, building and track equipment

Body;
length: 12.5 (319mm)
width: 6.7 (170mm) measured at wheel openings (widest point)
height: 3.7 (93mm)
Vehicle;
Wheelbase: Adjustable, 8.3 (210mm), 9 (225mm) and 9.4 (239mm)
COMMENTS
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
3 5x11mm TX Gears 2 DTXC1547
2 5x8mm TX Gears 2 DTXC1523
1 5x11mm Counter Gear 1 DTXC1547
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Uprights 1 DTXC1547
4 5x8mm Steering 2 DTXC1523
jxs 01/22/16
ir/jxs