Hot Racing SCXT12A02
$148.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Ackerman Steering Axle Case - Axial Scx Ii
Hot Racing's machined aluminum hi-steer AR44 axle for the Axial SCX10 II kit and RTR vehicles
- High pinion center section
- Extreme scale looks
- CNC machined 6061 aluminum, including: center section, tubes, diff cover, C-hubs, and knuckles
- Black anodizing on the axle, red anodizing on the diff cover
- Retains stock 8 degree kingpin angle for optimum scrub radius (can be adjusted by rotating the C-hubs)
- High clearance front steering tie rod and aluminum rod ends
- Optimized ackermann steering knuckle arms allow for tighter turning radius
- Interlocking c-hub knuckle to distribution equal joint loads
- Functioning diff cover fill and drain plugs
- Replaces factory plastic axle case housing and diff cover
- Parts to complete the axle, including: gears, bearings, differential, axles, etc.
- Recommended to use medium thread lock on screws threading into metal (screws may not have thread lock from the factory)
- Adjust the end points and dual rate settings on the transmitter to prevent over-steering damage to steering and drivetrain
- See the Hot Racing SCXT12AH axle for a silver variant
description revised by: SN January 25, 2017
FEATURES:
- Center section designed for maximum ground clearance- High pinion center section
- Extreme scale looks
- CNC machined 6061 aluminum, including: center section, tubes, diff cover, C-hubs, and knuckles
- Black anodizing on the axle, red anodizing on the diff cover
- Retains stock 8 degree kingpin angle for optimum scrub radius (can be adjusted by rotating the C-hubs)
- High clearance front steering tie rod and aluminum rod ends
- Optimized ackermann steering knuckle arms allow for tighter turning radius
- Interlocking c-hub knuckle to distribution equal joint loads
- Functioning diff cover fill and drain plugs
- Replaces factory plastic axle case housing and diff cover
YOU WILL RECEIVE:
- One (1) set of axle housing, diff cover, steering knuckles, and tie rodSPECIFICATIONS:
- Weight: 106gREQUIREMENTS:
- Installation- Parts to complete the axle, including: gears, bearings, differential, axles, etc.
- Recommended to use medium thread lock on screws threading into metal (screws may not have thread lock from the factory)
COMMENTS:
- The case is EMPTY. You will need gears, bearings, differential, axles, etc. - Adjust the end points and dual rate settings on the transmitter to prevent over-steering damage to steering and drivetrain
- See the Hot Racing SCXT12AH axle for a silver variant
description revised by: SN January 25, 2017
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov