Savox SAVSH1250MG

This coreless motor was made with a light weight design which provides smoother, faster, and more efficiet oppertion. The SH-1250MG is the super torque servo you need in any 1/12th scale pan car. With its metal case design it not only looks awesome but allows for cooler and smoother opertiong temperatures. This servo deals out a wopping 63.9 oz. of pure torque!

Features:
The coreless motor and light weight design provides smoother, faster, and more efficient operation. The metal case design not only looks awesome but also allows for cooler and smoother operating temperatures. Metal gears form a solid framework for precise control and operation. Supports digital and analog control signalsIdeal for rudder on 450 level helis, CCPM on 500 level helis, and steering servo on 1/12th scale cars.
Dimensions(mm): 35.0X15.0X29.2
Weight(g): 29.6
Speed(@4.8V sec/60): . 16
Torque(@4.8V oz-in): 30.6
Speed(@6.0V sec/60): . 11
Torque(@6.0V oz-in): 63.9
Gear: Metal
Bearing: 2BB
Case: Aluminum
25 Tooth Spline is compatible with Futaba servo horns
Frequency: 250-333hz
Pulse Width Frequency: 1520

Dimensions(mm): 35.0X15.0X29.2
Weight(g): 29.6
Speed(@4.8V sec/60): . 16
Torque(@4.8V oz-in): 30.6
Speed(@6.0V sec/60): . 11
Torque(@6.0V oz-in): 63.9
Gear: Metal
Bearing: 2BB
Case: Aluminum
Running current (at no load): 80 mA @ 4.8V
Running current (at no load): 100 mA @ 6.0V
Stall current (at locked): 800 mA @ 4.8V
Stall current (at locked): 1000 mA @ 6.0V
Idle current (at stopped): 6 mA @ 4.8V
Idle current (at stopped): 6 mA @ 6.0V
Limit angle: 210°±10°
Connector wire gauge: ＃26 AWG
Connector wire length: 250 ±5 mm
Horn gear spline: 25T
Control system: Pulse width modification
Amplifier type: Digital Controller
Operating Travel: 110° (when1000→2000 μsec)
Neutral position: 1500 μsec
Dead band width: 5 μsec
Rotating direction: Counterclockwise (when1500→2000 μsec)
Pulse width range: 800→2200 μsec
Maximum travel: Approx 154°(when800→2200 μsec)