RPM R/C Products RPM80581

This is a set of optional RPM Axle Carriers/Steering Blocks for the TRA Revo. These will also work on the T/E Maxx 2.5R and 3.3 versions. Constructed of molded composite material, dyeable white in color Wall thickness around the pillow-balls has been increased by 40% eliminating split walls Over 20% more material supports the pillow-balls, preventing them from pulling through Redesigned reinforcing rib supporting tie rod mount Redesigned boot lock tabs for easier removal of the silicone boots Press-fit bearings in the carrier for reduced axle movement Two-piece pillow-ball set screws use aluminum and Delrin for the ultimate in holding power under extreme situations Two Axle Carriers/Steering Blocks Two 12x21x5mm Inner Bearings Two 6x15x5mm Outer Bearings Four Aluminum Set Screws Four Delrin Bushing Caps Instruction Sheet Installing on axles, no modifications required Replacement Bearing Set, RPMC8570 Replacement Pillow-Ball Set Screws, RPMC0800 Do not use the TRA #5356 Long Travel Rocker Arm Set with these Axle Carriers. Doing so will void the RPM warranty. jxs 11/23/05 ir/jxs &