RPM R/C Products RPM70765
$14.96
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Front a-Arms and Bulkhead Blue Sc-10 T4 or Gt2 (2)
These are optional RPM Black Plastic Front A-Arms/Bulkhead for the Associated RC10G2, RC10T4, or SC10.
Plastic Construction
2 holes for mounting shocks
(1) Bulkhead
(4) 3x5.6mm Phillips round head screws
width: 1.542" (39.1mm)
Thickness: 0.3" (7.7mm)
description revised by: DB August 15, 2016
FEATURES:
Blue and Black in Color Plastic Construction
2 holes for mounting shocks
YOU WILL RECEIVE:
(2) Front A-Arms (1) Bulkhead
(4) 3x5.6mm Phillips round head screws
REQUIREMENTS:
Installation onto the Team Associated RC10GT SPECIFICATIONS:
length: 3.889" (99mm) width: 1.542" (39.1mm)
Thickness: 0.3" (7.7mm)
COMMENTS:
Tech NOTES:
RPM Front A-arms can be used on the Associated SC10 & T4. However, the outer front SC10 / T4 hinge pins will need to be replaced with the outer front hinge pins from the GT2. Additionally, the up right spacers used on the SC10 / T4 will no longer be needed. RPM Front A-arms require the use of the bulkhead supplied in the front A-arm kit. Stock bulkheads will not work with RPM A-arms. RPM GT2 rear A-arms will not work on the SC10 or T4. Please see RPM RPMC0742 or RPMC0745 for the SC10 or T4. description revised by: DB August 15, 2016
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov