Robart ROB622P47
$327.45
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Main Gear Top Flite P-47D Thunderbolt Giant
Robart brand Scale Retract Units Designed Specifically for the
Top Flite P-47 Giant Scale Kit.
This is an Offset Retract Unit that pivots on the outside instead of the
inside of the unit. The hinge point is on the front of the retract unit.
Fully functional Oleo Strut.
Offset Axles to provide a scale wheel stance.
Offset Unit advantage mounts between the wing ribs and stengthens
the wing even more.
Frame made of 'glass-filled nylon, aluminum and aircraft steel
Positive Up and Down Locks.
Axle hardware to mount the wheels to the retract struts.
One Left Retract Assembly
One Right Retract Assembly
1 ROBQ2367 4-way valve 1 ROBQ2368 fill valve
1 ROBQ2369 tubing 1 ROBQ2392 large pressure vessel
This Will Also Require Tee-Fittings (ROBQ0223) and Retaining Nuts
(ROBQ2370).
Recommended that 5 Wheels are the Maximum size that can be used.
Width of retract unit: 2, (including the strut: 3.25)
Length of unit: 3-5/8 (not counting the cylinder)
Height of unit: 1-1/2
Diameter of Strut: 1/2
Length of Strut: 9
Weight Bearing Capacity: 22 to 24 pounds.
Weight per pair: 23.2 oz.
COMMENTS
This unit is recommended only for the Giant P-47 Thunderbolt kit
from Top Flite.
This is the New updated Version.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Top Flite P-47 Giant Scale Kit.
This is an Offset Retract Unit that pivots on the outside instead of the
inside of the unit. The hinge point is on the front of the retract unit.
FEATURES:
Fully functional Oleo Strut.
Offset Axles to provide a scale wheel stance.
Offset Unit advantage mounts between the wing ribs and stengthens
the wing even more.
Frame made of 'glass-filled nylon, aluminum and aircraft steel
Positive Up and Down Locks.
YOU WILL RECEIVE:
Axle hardware to mount the wheels to the retract struts.
One Left Retract Assembly
One Right Retract Assembly
REQUIREMENTS:
1 ROBQ2367 4-way valve 1 ROBQ2368 fill valve
1 ROBQ2369 tubing 1 ROBQ2392 large pressure vessel
This Will Also Require Tee-Fittings (ROBQ0223) and Retaining Nuts
(ROBQ2370).
Recommended that 5 Wheels are the Maximum size that can be used.
SPECIFICATIONS:
Width of retract unit: 2, (including the strut: 3.25)
Length of unit: 3-5/8 (not counting the cylinder)
Height of unit: 1-1/2
Diameter of Strut: 1/2
Length of Strut: 9
Weight Bearing Capacity: 22 to 24 pounds.
Weight per pair: 23.2 oz.
COMMENTS
This unit is recommended only for the Giant P-47 Thunderbolt kit
from Top Flite.
This is the New updated Version.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov