Robart ROB622-5
$327.45

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Main Gear Top Flite P-51D Mustang Giant
Robart brand scale retract units designed specifically for the Top Flite P-51D
Giant Scale. This unit pivots on the outside of the unit. The hinge point is on
the front of the retract unit.
FEATURES:
Fully functional Oleo Strut.
Offset Axles to provide a scale wheel stance.
Glass filled Nylon Frame with Aircraft Steel and Aluminum with
Positive Up and Down Locks.
SPECIFICATIONS:
Width of retract unit: 2.5in (64mm)
Length of unit: 2 (53mm)
Diameter of Strut wire: 1/2
Weight Bearing Capacity: 22 to 24 pounds.
Weight per pair: 23.2 oz.
REQUIREMENTS:
1 ROBQ2367 1 ROBQ2368
1 ROBQ2369 1 ROBQ2392
1 ROBQ1765 - If you want to add landing gear doors
Also Requires Tee-Fittings (1/16) ROBQ0215 and Retaining Nuts
Recommended that 5 Wheels are the Maximum size that can be used.
YOU WILL RECEIVE:
Axle hardware to mount the wheels to the retract struts.
COMMENTS
This unit is recommended only for the Giant P-51D Mustang from TF.
JPR 9-11-97
ir/jl
update 11-30-98 kzh
update 10-10-05 jbm
update 12-4-06 rda
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Giant Scale. This unit pivots on the outside of the unit. The hinge point is on
the front of the retract unit.
FEATURES:
Fully functional Oleo Strut.
Offset Axles to provide a scale wheel stance.
Glass filled Nylon Frame with Aircraft Steel and Aluminum with
Positive Up and Down Locks.
SPECIFICATIONS:
Width of retract unit: 2.5in (64mm)
Length of unit: 2 (53mm)
Diameter of Strut wire: 1/2
Weight Bearing Capacity: 22 to 24 pounds.
Weight per pair: 23.2 oz.
REQUIREMENTS:
1 ROBQ2367 1 ROBQ2368
1 ROBQ2369 1 ROBQ2392
1 ROBQ1765 - If you want to add landing gear doors
Also Requires Tee-Fittings (1/16) ROBQ0215 and Retaining Nuts
Recommended that 5 Wheels are the Maximum size that can be used.
YOU WILL RECEIVE:
Axle hardware to mount the wheels to the retract struts.
COMMENTS
This unit is recommended only for the Giant P-51D Mustang from TF.
JPR 9-11-97
ir/jl
update 11-30-98 kzh
update 10-10-05 jbm
update 12-4-06 rda