RC Lights RCL106MB
$44.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.6 LED System For Rpm Canisters 3mm 4/24
Product Features
*Brightest LEDs Industry Wide
*Dual Intensity Brake Light Action
*Simple & Easy Installation
*Powers Directly From the RX
*All Mounting Hardware Included
*Fast Body Removal
Overview
This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights! Use RCL106MB to add 4 3mm white LED lights to either RPM Front Bumper Canisters or RPM Narrow Roof Canisters and 2 3mm red LED lights to RPM Tail Light Canisters with dual-intensity brake light action built right into the included microBRAKE™ - 6 LED controller. Includes the microBRAKE™ 6 LED Controller with built-in brake light action! Compatible with RPM Light Canister Set RPM80982 & RPM80983 --Direct fit for Slash 4x4, Slash & SC10 RPM Front Bumpers. Compatible with RPM Narrow Roof-Mounted Light Bar Set RPM80782 & RPM80783. Compatible with RPM Tail Light Set RPM81030 --Direct fit for Slash & SC10. Power directly from the RX or optional battery source. To change headlight or tail light colors use 5mm or 3mm LEDs. 5mm version available; RCL5006. Everything needed for a complete installation is included with every lighting system! *NOTE: microBRAKE™ 6 LED Controller is not compatible with the Remote Power Switch (RCL5090). Includes: Instruction Set - (1) microBRAKE™ 6 LED controller RCL5052 (1) RX Pass-Thru™ w/ 3P power plug RCL5074 (4) 4" wire extensions RCL53904 (2) 24" wire extensions RCL539024 (4) 3mm white headlights RCL5280W (2) 3mm red tail lights RCL5280R (6) 2P connector housings - (1) 3.75"x3" aluminum tape RCL5080 (6) zip ties & bases RCL5080 Specs: SYSTEM CURRENT DRAW (@6V): 90mA with brake lights dim; 120mA with all LEDs fully bright (A standard servo draws approx. 350mA) LED Controller INPUT VOLTAGE: 3.6-7.4V [6V Optimal] TYP OUTPUT CURRENT (per LED channel): 20-30mA DIMENSIONS: 1.3" x 0.6" x 0.3" Blue, Green, White, White Strobe, Red Strobe LEDs FORWARD VOLTAGE: 3.2V MAX CURRENT: 30mA Amber, Red LEDs FORWARD VOLTAGE: 1.9V MAX CURRENT: 30mA
*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.
*DO NOT look directly into beam.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov