RC4WD RC4Z-E0066
$19.99
in stock? YES
alternate part numbers:
RC4WD 1:10 Squadron Pro LED Lights (2)
RC4WD 1/10 Squadron Pro LED Lights (2 lights)
Perfect for any project these little units work great at lighting the way. Made to fit anywhere.
Adjustable Bracket for Rotating Light
4 Individual LED Bulbs
Super Bright Lighting
Standard Receiver Plug
Connects to Extra Channel on Receiver
Connects Directly to Battery
Capable of 11.1v
2mm Mounting Holes
Overall length: 0.57in / 14.5mm
Light Bar width: 0.52in / 13.4mm
Overall height: 0.57in / 14.7mm
Light Bar height: 0.55in / 14.2mm
Weight: 0.1oz / 3g
1x Decal Sheet
Replacement Hardware:
M2 X 6mm Steel Socket Head Cap Screws (Black) (RC4Z-S0611)
M1.4 x 3mm Phillips Button Head (Silver)
M1.2 x 3mm Phillips Flat Head (Silver)
Optional Parts:
RC4WD Mini ON/OFF Switch for Lighting Unit (RC4Z-E0081)
RC4WD Strobe Lighting Unit (RC4Z-S1573)
Mounting hardware M2 SHCS / M2 BHCS
While the lightbar comes with a standard receiver plug, this is only for ease of use. The receiver will not allow enough power for the lightbar and it will be dim. If you want the light to be bright, you will need to power it directly from your battery, or use a BEC to get more power to your receiver.
Perfect for any project these little units work great at lighting the way. Made to fit anywhere.
SPECIFICATIONS:
Plastic Molded HousingAdjustable Bracket for Rotating Light
4 Individual LED Bulbs
Super Bright Lighting
Standard Receiver Plug
Connects to Extra Channel on Receiver
Connects Directly to Battery
Capable of 11.1v
2mm Mounting Holes
Overall length: 0.57in / 14.5mm
Light Bar width: 0.52in / 13.4mm
Overall height: 0.57in / 14.7mm
Light Bar height: 0.55in / 14.2mm
Weight: 0.1oz / 3g
YOU WILL RECEIVE:
2x RC4WD 1/10 Squadron Pro LED Lights1x Decal Sheet
Replacement Hardware:
M2 X 6mm Steel Socket Head Cap Screws (Black) (RC4Z-S0611)
M1.4 x 3mm Phillips Button Head (Silver)
M1.2 x 3mm Phillips Flat Head (Silver)
Optional Parts:
RC4WD Mini ON/OFF Switch for Lighting Unit (RC4Z-E0081)
RC4WD Strobe Lighting Unit (RC4Z-S1573)
NOTES:
This unit has to be connected directly to 2 or 3 cell LiPo to operate properly with 7.4 volts and 11.1 volts. Mounting hardware M2 SHCS / M2 BHCS
While the lightbar comes with a standard receiver plug, this is only for ease of use. The receiver will not allow enough power for the lightbar and it will be dim. If you want the light to be bright, you will need to power it directly from your battery, or use a BEC to get more power to your receiver.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov