RC4WD RC4Z-A0017
$179.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued Blackwell X1 Rear Scale Axle (Black)
Blackwell Axle main features &
Differential Cover
Center Axle Case (banjo)
Differential Carrier (third member)
Standard Overall Width Hex to Hex 7.55" (192mm)
Final Drive Ratio 3.75 : 1
Number of Internal Gears 4
Internal Shafts 2
Number of Bearings and or Bushings 13
Axle Tube Thickness .5 inch (12.7mm)
Banjo Width 1.58 inch (40mm)
Knuckle Size 1.05 inch (26mm)
Center Clearance to drive .71 inch (18mm)
Output Shaft OD: 5mm / 0.19
Pin to Pin width: 181mm / 7.12 "
Pumpkin height: 50mm / 1.9
12mm Steel Wheel Hex
Blackwell X1 Axle additional
Hardened Steel Spool Gear
5mm Axle Input Shaft
Full Ball Bearings
Powder Coated in black
Engineered by Brett in Massachusetts USA
Manufactured by RC4WD
2x Steel Straight Axle
1x Spool Gear
2x 12mm Steel Wheel Hex
Complete Hardwares and Bearings
Optional Parts:
Socket Head Cap Screw M2 X 5mm (10) (Z-S0738)
4 Link Mounts for Blackwell Axle (Black) (Z-S0016)
RC4WD 12mm Mini Hex Wheel Widener Set (+15mm) (Z-S0407)
Transmission:
This axle is designed to work with our R2 Transmission, Planetary Reduction Tranny, or Transfer Case
Wheel:
This Axle is designed to fit 1.9 or 2.2 Wheels that has a 12mm back Hex.
To get more width, you can use 12mm widener (X-0132)
SPECIFICATIONS:
Removable Axle Tubes (each side)Differential Cover
Center Axle Case (banjo)
Differential Carrier (third member)
Standard Overall Width Hex to Hex 7.55" (192mm)
Final Drive Ratio 3.75 : 1
Number of Internal Gears 4
Internal Shafts 2
Number of Bearings and or Bushings 13
Axle Tube Thickness .5 inch (12.7mm)
Banjo Width 1.58 inch (40mm)
Knuckle Size 1.05 inch (26mm)
Center Clearance to drive .71 inch (18mm)
Output Shaft OD: 5mm / 0.19
Pin to Pin width: 181mm / 7.12 "
Pumpkin height: 50mm / 1.9
12mm Steel Wheel Hex
Blackwell X1 Axle additional
SPECIFICATIONS:
CNC Machined Billet Aircraft Grade Aluminum HousingHardened Steel Spool Gear
5mm Axle Input Shaft
Full Ball Bearings
Powder Coated in black
Engineered by Brett in Massachusetts USA
Manufactured by RC4WD
YOU WILL RECEIVE:
1x Blackwell Straight Axle Housing2x Steel Straight Axle
1x Spool Gear
2x 12mm Steel Wheel Hex
Complete Hardwares and Bearings
Optional Parts:
Socket Head Cap Screw M2 X 5mm (10) (Z-S0738)
4 Link Mounts for Blackwell Axle (Black) (Z-S0016)
RC4WD 12mm Mini Hex Wheel Widener Set (+15mm) (Z-S0407)
Transmission:
This axle is designed to work with our R2 Transmission, Planetary Reduction Tranny, or Transfer Case
Wheel:
This Axle is designed to fit 1.9 or 2.2 Wheels that has a 12mm back Hex.
To get more width, you can use 12mm widener (X-0132)
NOTES:
While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov