Power Racing Production PRPPE030
$88.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship..30 monster engine with hex start
This is the Power Racing Monster .30 (5.0cc) Rear Exhaust Monster Truck Engine with Pilot Type Crankshaft.
Same mounting dimensions as .21 size engines making upgrading easier
Advanced Metallic Liner (ABC) cylinder construction. is
more durable. For better compression and longer life.
Machined aluminum piston, 3-port cylinder liner and double
edged connecting rod
Single needle Slide Valve Carburetor SG (pilot) type oversized crankshaft with rubber-sealed front bearing
and oversized rear bearing to handle high torque loads
One Monster .30 Engine with 6.mm Hex start
Car blend nitromethane fuel with 20-30% nitromethane content, 20%
nitro content recommended as starting point
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance
Displacement: 0.298 cu in (5.0cc)
Bore: 0.728" (18.5mm)
Stroke: 0.717" (18.2mm)
Practical RPM: 4, 000-36, 000
Power Output: 3.0 ps/28, 000 RPM
Weight: 14.1oz (399g)
Crankshaft Size: 1/4-28
Factory Needle Valve Setting: 2-3/4 turns OPEN from fully closed
Distance Between Mounting Holes Same Side: 0.83" (21mm)
Distance Between Mounting Holes Opposite Side: 1.4" (37mm)
Distance Between Mounting Holes Diagonal: 2.3" (59mm)
Height Bottom of Mounting Ears to Top of Cylinder Head: 3.8" (97.7mm)
Width of Mounting Ears: 1.8" (45mm)
Width of Crankcase Below Mounting Ears: 1.2" (30.8mm)
Distance from Front Bearing to End of Crankshaft: 1.2" (29.5mm)
Distance from Center of Engine to Front Bearing: 1.7" (44mm)
Distance from Center of Engine to Backplate: 0.84" (21.3mm)
Starter Shaft diameter: 0.24" (6mm)
Use Losi SpinStart. Losb5104
FEATURES:
Same mounting dimensions as .21 size engines making upgrading easier
Advanced Metallic Liner (ABC) cylinder construction. is
more durable. For better compression and longer life.
Machined aluminum piston, 3-port cylinder liner and double
edged connecting rod
Single needle Slide Valve Carburetor SG (pilot) type oversized crankshaft with rubber-sealed front bearing
and oversized rear bearing to handle high torque loads
YOU WILL RECEIVE:
One Monster .30 Engine with 6.mm Hex start
REQUIREMENTS:
Car blend nitromethane fuel with 20-30% nitromethane content, 20%
nitro content recommended as starting point
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance
SPECIFICATIONS:
Displacement: 0.298 cu in (5.0cc)
Bore: 0.728" (18.5mm)
Stroke: 0.717" (18.2mm)
Practical RPM: 4, 000-36, 000
Power Output: 3.0 ps/28, 000 RPM
Weight: 14.1oz (399g)
Crankshaft Size: 1/4-28
Factory Needle Valve Setting: 2-3/4 turns OPEN from fully closed
Distance Between Mounting Holes Same Side: 0.83" (21mm)
Distance Between Mounting Holes Opposite Side: 1.4" (37mm)
Distance Between Mounting Holes Diagonal: 2.3" (59mm)
Height Bottom of Mounting Ears to Top of Cylinder Head: 3.8" (97.7mm)
Width of Mounting Ears: 1.8" (45mm)
Width of Crankcase Below Mounting Ears: 1.2" (30.8mm)
Distance from Front Bearing to End of Crankshaft: 1.2" (29.5mm)
Distance from Center of Engine to Front Bearing: 1.7" (44mm)
Distance from Center of Engine to Backplate: 0.84" (21.3mm)
Starter Shaft diameter: 0.24" (6mm)
COMMENTS:
Use Losi SpinStart. Losb5104
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov