Power Racing Production PRPPE028T
$148.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship..28 5 port engine pull start
This is the Power Racing .28 Engine with Pull Start. Ideal for powering monster trucks such as the Associated Monster GT, HPI Savage and T-Maxx Big Block conversion.
Same mounting dimensions as a .21 size engine
ABC designed piston and sleeve
High performance 8mm aluminum slide valve carburetor
Double edge bushing connecting rod
Two piece replaceable button style head
Three intake, one exhaust race spec porting configuration
Skirted double oil groove piston design
Rear exhaust
Black aluminum cylinder head with 12 cooling fins
Power Racing .28 engine with pull start, glow plug,
, rubber exhaust gasket, brass collet and instruction manual
20% nitro content car fuel with at least 16% oil content
Air and fuel filters, glow plug wrench and fuel tubing
Crankshaft: Standard SG
Horsepower: 2.85
RPM (max): 42, 800
Bore: 18.8mm
Stroke: 16.5mm
Distance between mounting holes same side: 0.83" (21mm)
Distance between mounting holes opposite side: 1.4" (37mm)
Distance from end of crankshaft to front bearing: 1.1" (29mm)
Distance between mounting flanges: 1.8" (45mm)
Distance/bottom of mounting flanges/top of cylinder head: 3.6" (91mm)
Distance between pull start and crankshaft end: 4.4" (113mm)
Distance between pull start and front bearing: 3.3" (84.5mm)
Outer diameter of exhaust opening: 0.65" (16.5mm)
FEATURES:
Same mounting dimensions as a .21 size engine
ABC designed piston and sleeve
High performance 8mm aluminum slide valve carburetor
Double edge bushing connecting rod
Two piece replaceable button style head
Three intake, one exhaust race spec porting configuration
Skirted double oil groove piston design
Rear exhaust
Black aluminum cylinder head with 12 cooling fins
INCLUDES:
Power Racing .28 engine with pull start, glow plug,
, rubber exhaust gasket, brass collet and instruction manual
REQUIREMENTS:
20% nitro content car fuel with at least 16% oil content
Air and fuel filters, glow plug wrench and fuel tubing
SPECIFICATIONS:
Crankshaft: Standard SG
Horsepower: 2.85
RPM (max): 42, 800
Bore: 18.8mm
Stroke: 16.5mm
Distance between mounting holes same side: 0.83" (21mm)
Distance between mounting holes opposite side: 1.4" (37mm)
Distance from end of crankshaft to front bearing: 1.1" (29mm)
Distance between mounting flanges: 1.8" (45mm)
Distance/bottom of mounting flanges/top of cylinder head: 3.6" (91mm)
Distance between pull start and crankshaft end: 4.4" (113mm)
Distance between pull start and front bearing: 3.3" (84.5mm)
Outer diameter of exhaust opening: 0.65" (16.5mm)
COMMENTS:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov