Peak Performance PEK00574
$79.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued LI-PO Pro 5500mAh 90c 7.4V Saddle Tube
This is the Peak 7.4V 5500mAh 90C LiPo Saddle Pack.
Ideal for 1/10 scale off-road buggies
LiPo compatible charger and balancer
Rated Pack Voltage: 7.4V (each module is 3.7V)
Capacity: 5500mAh
Max Recommended Charge Current: 1C (5.4A)
Continuous Discharge: 90C
Weight: 11.3oz (321g)
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
FEATURES:
YOU WILL RECEIVE:
Two 3.7V Modules, Deans Plug Lead with 4mm Male Bullets and Balancing plugREQUIREMENTS:
SPECIFICATIONS:
Capacity: 5500mAh
Max Recommended Charge Current: 1C (5.4A)
Continuous Discharge: 90C
DIMENSIONS:
0.9 x 1.8 x 2.7" (25.1 x 47 x 69mm) each moduleWeight: 11.3oz (321g)
COMMENTS:
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov