OS Max OSM15611
$169.98
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship..55ax Abl 40j Carb E3070 Muffler
This is the O.S. Max .55 AX Aircraft Engine with Muffler.
Same mounting dimensions as the O.S. Max .46 AX
Advanced Bi-Metallic Liner process uses a double layer of plating
material rather than one thick layer. This helps the metal bond to
the cylinder and makes the plating more durable. Also, the plating
process is more consistent, resulting in a more precise fit between
piston and sleeve for better compression and longer life.
Power Box positionable muffler
Angular head design offers increased surface area for better cooling
40J Carburetor with diagonally placed Needle Valve eliminating Remote
Needle Valve placement
Two year limited warranty
O.S. Max 55 AX ABL Aircraft Engine with E-3070 Muffler, 40J
carburetor, #8 glow plug, illustrated instruction manual, 3.5"
(90mm) long needle valve extension cable and two 3x35mm muffler
screws
Aircraft blend fuel containing 5%-20% Nitromethane with at least 18%
lubricant
Displacement: .545 cu in (8.93cc)
Bore: .906" (23mm)
Stroke: .846" (21.5mm)
Practical RPM: 2,000-17,000
Power Output: 1.75 ps/16,000 RPM
Weight: 14.29oz (405g) w/o muffler
18.52oz (525g) w/ muffler
Recommended Props: 12x7-8, 13x6-7
Crankshaft thread size:1/4-28
Distance/remote needle to end of crankshaft: 4.7" (119.4mm)
Distance from center of engine to drive hub: 2.4" (60.4mm)
Distance from center of engine to end of crankshaft: 3.4" (87.6mm)
Distance/crankshaft center to muffler exhaust outlet: 3.9" (100.5mm)
Height from crankcase bottom to top of cylinder head: 3.3" (85.2mm)
Height/crankshaft center to top of cylinder head: 2.6" (67.4mm)
Width including mounting tabs: 2" (50.8mm)
Width not including mounting tabs: 1.4" (35.6mm)
Width between mounting holes same side: .69" (17.5mm)
Width between mounting holes opposite side: 1.7" (43.2mm)
Diameter of muffler body: 1.5" (38.1mm)
Angle of muffler in relation to engine: 4°
High Speed Needle: 2 turns out from fully closed
Low Speed Neelde: 3mm gap between the needle and spray bar at full
throttle (looking down the neck of the carb)
Available Pitts Mufflers include BISG4046.
jxs 9/20/06
updated jpg 7/18/07
updt lmm 3/27/09
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
COMMENTS:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov