Orion, Team ORI25026
$24.00
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued Method Modified 23t Double
This is the Team Orion 23x2 (23 turn, double wound) Method Motor. Based upon the Havok and Rush line of motors, Method R motors are the perfect hop-up for ready-to-run vehicles.
Fixed endbell for easy operation
Cylindrical brushes, angled V-brush orientation
Low resistance brush control tubes
Intelligent anti-vibration spring system
Race bred armature
Dual ball bearings
Bullet connectors
One Team Orion Method Motor with instruction sheet and 4" (102mm)
motor leads with spade clips and bullet connectors pre-installed
Installing in vehicle, use DTXC2459 if motor cleaner is needed
Length Without Shaft: 2.1" (54.5mm)
Length With Shaft: 2.7" (69mm)
Shaft diameter: 1/8" (3mm)
Can diameter: 1.4" (36mm)
Max Power: 114.1 Watts
Max RPM: 23, 801 (both power & RPM measured @ 7.2V)
The difference between the Method and the Method R line of motors
is that the standard Method series features a fixed endbell for
ease of operation and the R version features a removeable
endbell with adjustable timing.
Replacement Parts
Brushes:
ORI41130 SV2 brush/spring assembly w/eyelet
ORI41910 Enduro Brushes
ORI41091 Sprint Brushes (ORIC4191)
ORI41092 Edge Brushes-Enduro Compound (ORIC4192)
ORI41093 Edge Brushes-Sprint Compound (ORIC4193)
Springs:
ORI41390 Springs-Soft-11 coil .30mm
ORI41391 Springs-Medium-10 coil .30mm
ORI41392 Springs-Medium hard-9 coil .30mm
ORI41393 Springs-Hard-8 coil .30mm
ORI41386 Springs-10 coil .35mm
ORI41387 Springs-9 coil .35mm
Accessories:
ORI41704 Free Revs Lube (ORIC4130)
ORI14613 Motor Peformance Monitor
jxs 6/14/05
ir/jxs
this information was sourced from Great Planes Model Distributors
FEATURES:
Fixed endbell for easy operation
Cylindrical brushes, angled V-brush orientation
Low resistance brush control tubes
Intelligent anti-vibration spring system
Race bred armature
Dual ball bearings
Bullet connectors
INCLUDES:
One Team Orion Method Motor with instruction sheet and 4" (102mm)
motor leads with spade clips and bullet connectors pre-installed
REQUIREMENTS:
Installing in vehicle, use DTXC2459 if motor cleaner is needed
SPECIFICATIONS:
Length Without Shaft: 2.1" (54.5mm)
Length With Shaft: 2.7" (69mm)
Shaft diameter: 1/8" (3mm)
Can diameter: 1.4" (36mm)
Max Power: 114.1 Watts
Max RPM: 23, 801 (both power & RPM measured @ 7.2V)
COMMENTS:
The difference between the Method and the Method R line of motors
is that the standard Method series features a fixed endbell for
ease of operation and the R version features a removeable
endbell with adjustable timing.
Replacement Parts
Brushes:
ORI41130 SV2 brush/spring assembly w/eyelet
ORI41910 Enduro Brushes
ORI41091 Sprint Brushes (ORIC4191)
ORI41092 Edge Brushes-Enduro Compound (ORIC4192)
ORI41093 Edge Brushes-Sprint Compound (ORIC4193)
Springs:
ORI41390 Springs-Soft-11 coil .30mm
ORI41391 Springs-Medium-10 coil .30mm
ORI41392 Springs-Medium hard-9 coil .30mm
ORI41393 Springs-Hard-8 coil .30mm
ORI41386 Springs-10 coil .35mm
ORI41387 Springs-9 coil .35mm
Accessories:
ORI41704 Free Revs Lube (ORIC4130)
ORI14613 Motor Peformance Monitor
jxs 6/14/05
ir/jxs
this information was sourced from Great Planes Model Distributors
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov