Novak NOV3214

This is the Novak Goat 3S Electronic Speed Control for Brushless and Brushed Crawler Motors. Operates on 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell) Crawling specific software with Zero Reverse Delay for quick response in forward and reverse and Worm-Drive Profile for vehicles that do not require electronic drag brakes Fully programmable, user-friendly interface with six adjustable parameters: Drag Brake (10 settings), Dead Band (5 settings), Minimum Drive (5 settings), Drive Frequency in brush mode (7 settings) LiPo Cut-Off and Reverse Motor Rotation Specially designed MOSFET for greater effectiveness in 3S LiPo applications Water resistant case with gasket seal Sensor-based for excellent braking and low-speed driveability Auto detect brushed motor mode, locked rotor detection and thermal overload protection 120 limited warranty through manufacturer Novak Goat 3S Electronic Speed Control with Heat Sink, Power Trans Cap Module, 14G Power Wires, Tamiya style JST Battery Connector, Cooling Fan, Input Harness, External BEC Module for 3S applications Instructions, Double Sided Tape Motor such as the Novak Crawler Series (NOVC3414, NOVC3419, NOVC3420) Forty Five (NOVC3545), Fifty Five (NOVC3555) or the Novak SS Pro series motors Input Voltage: 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell) Size: 1.18 x 1.54" (30 x 39.1mm) Weight: 1.50oz. (42.6g) without wires Design: Sensor-based Motor Limit: 13.5-turn (2S Li-Po) and 18.5-turn (3S Li-Po) Novak 540-size sensored brushless 27-turn (2S Li-Po) and 33-turn (3S Li-Po) 540-sized brush motor On-Resistance (brushless): 0.00070 ohms @ 25°C trans. temp. BEC: 6.0 volts DC / 5.0 amps External BEC: 6.0 volts DC/3.0 amps switching regulator Rated Current: 150 Amps @ 25°C trans. temp. Braking Current: 150 Amps @ 25°C trans. temp. Status LEDs: 4 Voltage Cut-Off: 6.25V (2S) or 9.75V (3S) (when LiPo Cut-Off Circuitry is enabled) Power Wires: 14G Super-Flex Copper-Strand Silicone Wire jxs 8/19/09 ir/jxs &