Novak NOV3029

This is the Novak Brushless Crawling System for 2S & 3S Applications with the Goat 3S Electronic Speed Control and Ballistic 21.5 Turn Motor. Novak Goat 3S- Operates on 2-3S LiPo cells or 4-9 NiMH cells (1.2V/cell) Crawling specific software with Zero Reverse Delay for quick response in forward and reverse and Worm-Drive Profile for vehicles that do not require electronic drag brakes Fully programmable, user-friendly interface with six adjustable parameters: Drag Brake (10 settings), Dead Band (5 settings), Minimum Drive (5 settings), Drive Frequency in brush mode (7 settings) LiPo Cut-Off and Reverse Motor Rotation Specially designed MOSFET for greater effectiveness in 3S LiPo applications Water resistant case with gasket seal Sensor-based for excellent braking and low-speed driveability Auto detect brushed motor mode, locked rotor detection and thermal overload protection 21.5 Turn Ballistic Motor- Completely rebuildable allowing upgrades or replacement of various parts Easy to adjust timing assembly Meets ROAR and IFMAR specifications 12.3mm nickel-plated sintered neodymium rotor for maximum performance in high-temperature conditions 0.125" (3.2mm) pinion shaft accepts all existing pinion gears Color-coded hand wound stator identifies number of motor winds Sensor-based for excellent torque and low-speed driveability controls Heavy duty solder tabs 120 day limited warranty through manufacturer on both components beginning at date of purchase Novak Goat 3S Electronic Speed Control with Heat Sink, Power Trans Cap Module, 14G Power Wires, Tamiya style JST Battery Connector, Cooling Fan, Input Harness, External BEC Module for 3S applications Instructions, Double Sided Tape, Ballistic Spec Brushless 21.5 turn Motor with sensor wire Installing in vehicle Novak Goat 3S- Input Voltage: 2-3S LiPo cells or 4-9 NiMH cells (1.2V/cell) Size: 1.18 x 1.54" (30 x 39.1mm) Weight: 1.50oz. (42.6g) without wires Design: Sensor-based Motor Limit: 13.5-turn (2S LiPo) and 18.5-turn (3S LiPo) Novak 540-size sensored brushless 27-turn (2S LiPo) and 33-turn (3S LiPo) 540-sized brush motor On-Resistance (brushless): 0.00070 ohms @ 25°C trans. temp. BEC: 6.0 volts DC / 5.0 amps External BEC: 6.0 volts DC/3.0 amps switching regulator Rated Current: 150 Amps @ 25°C trans. temp. Braking Current: 150 Amps @ 25°C trans. temp. Status LEDs: 4 Voltage Cut-Off: 6.25V (2S) or 9.75V (3S) (when LiPo Cut-Off Circuitry is enabled) Power Wires: 14G Super-Flex Copper-Strand Silicone Wire Ballistic 21.5 Turn Motor- Watts: 85 Maximum RPM: 50,000 kV: 1800 RPM/volt (unloaded) Sensor Harness Length: 9" (230mm) Motor Size: 2.07 x 1.41" (52.6 x 35.8mm) Motor Weight: 6.6oz (187g) Color-Coded Stator: Green Magnetic Material Operating Temp:* 392°F (200°C) * Motor is not capable of operating at 392°F (200°C). The recommended operating temperature is 160°F (70°C) jxs 12/14/09 ir/jxs &