Novak NOV3028
$164.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Goat 3S Crawler brushless System 18.5
This is the Novak brushless Crawling System for 2S & 3S Applications
with the Goat 3S Electronic Speed Control and Ballistic 18.5 Turn Motor.
FEATURES:
Operates on 2-3S LiPo cells or 4-9 NiMh cells (1.2V/cell)
Crawling specific software with Zero Reverse Delay for quick response
in forward and reverse and Worm-Drive Profile for vehicles that do
not require electronic drag brakes
Fully programmable, user-friendly interface with six adjustable
parameters: Drag Brake (10 settings), Dead Band (5 settings),
Minimum Drive (5 settings), Drive Frequency in brush mode
(7 settings) LiPo Cut-Off and Reverse Motor Rotation
Specially designed MOSFET for greater effectiveness in 3S LiPo
applications
Water resistant case with gasket seal
Sensor-based for excellent braking and low-speed driveability
Auto detect brushed motor mode, locked rotor detection and thermal
overload protection
18.5 Turn Ballistic Motor-
Completely rebuildable allowing upgrades or replacement of various
parts
Easy to adjust timing assembly
Meets ROAR and IFMAR specifications
12.3mm nickel-plated sintered neodymium rotor for maximum
performance in high-temperature conditions
0.125" (3.2mm) pinion shaft accepts all existing pinion gears
Color-coded hand wound stator identifies number of motor winds
Sensor-based for excellent torque and low-speed driveability
controls
Heavy duty solder tabs
120 day limited warranty through manufacturer on both components
beginning at date of purchase
YOU WILL RECEIVE:
Novak Goat 3S Electronic Speed Control with Heat Sink, Power Trans Cap Module, 14G Power Wires, Tamiya style JST Battery Connector,
Cooling Fan, Input Harness, External BEC Module for 3S applications
Instructions, Double Sided Tape, Ballistic Spec brushless 18.5 turn
Motor with sensor wire
REQUIREMENTS:
SPECIFICATIONS:
Input Voltage: 2-3S LiPo cells or 4-9 NiMh cells (1.2V/cell)
Size: 1.18 x 1.54" (30 x 39.1mm)
Weight: 1.50oz. (42.6g) without wires
Design: Sensor-based
Motor Limit: 13.5-turn (2S LiPo) and 18.5-turn (3S LiPo)
Novak 540-size sensored brushless 27-turn (2S LiPo)
and 33-turn (3S LiPo) 540-sized brush motor
On-Resistance (brushless) : 0.00070 ohms @ 25C trans. temp.
BEC: 6.0 volts DC / 5.0 amps
External BEC: 6.0 volts DC/3.0 amps switching regulator
Rated Current: 150 Amps @ 25C trans. temp.
Braking Current: 150 Amps @ 25C trans. temp.
Status LEDs: 4
Voltage Cut-Off: 6.25V (2S) or 9.75V (3S) (when LiPo Cut-Off
Circuitry is enabled)
Power Wires: 14G Super-Flex Copper-Strand Silicone Wire
Ballistic 18.5 Turn Motor-
Watts: 119
Sensor Harness length: 9" (230mm)
Motor Size: 2.07 x 1.41" (52.6 x 35.8mm)
Shaft diameter: 0.125" (3.2mm)
Motor Weight: 6.6oz (187g)
Magnetic Material Operating Temp: * 392F (200C)
* Motor is not capable of operating at 392F (200C). The recommended
operating temperature is 160F (70C)
jxs 12/14/09
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov