Novak NOV3051

This is the Novak Mongoose 10.5 Micro Brushless System with the Three-80 10.5 Turn Motor and the Mongoose Micro ESC for 1/18 and 1/16 scale Cars. ESC- Compatible with 380-size or smaller brush motors and Novak Three-80 series brushless motors Three brushless throttle profiles designed for micro vehicles and one brushed throttle profile (features built-in Auto Detect Brush Mode) One touch programming and four status LEDs 2S & 3S Li-Po cutoff circuitry can be activated in any throttle profile Gold-plated PCB direct-solder wiring tabs Plug-in input harness and user-replaceable switch harness Replaceable 16GA silicone battery and motor wire Water-resistant case and factory installed heat sink 10.5 Turn Motor- Recommended for racers wanting a great balance between power and runtime Sensor commutation design provides smooth braking and controlled bursts of power Sintered Neodymium rotor for maximum acceleration 120 day limited warranty on both components Novak Mongoose Electronic Speed Control and Novak Three-80 10.5 turn Brushless Motor and Instruction Manual Installing in vehicle and connecting to receiver and battery ESC- Input Voltage: 2-3 Li-Poly cells or 4-9 Ni-MH/Ni-Cd cells (1.2V/cell) Forward/Reverse: FWD/BRK/REV (brushless mode); FWD/BRK (brush mode) Motor Limit: any Novak Micro (brushless); any 380-size (brushed) Size: 1.15" x 0.95" (29 x 24.3mm) Weight: 0.77 oz. (21.7 grams) Rated & Braking Current: 40 amps per phase (brushless/brush) Power Wires: 16-gauge BEC: 6.0 volt/2.0 amps Voltage Cut-Off: 6.25 volts (2S), 9.375 (3S) [when Li-Poly Cut-Off Circuitry is enabled] Motor Plug: 2 mm connectors Motor- Input Voltage: 2-3 cell Li-Po or 4-9 Ni-MH/Ni-Cd cells (1.2 V/cell) Watts: 165 Kv (unloaded): 7300 Size: 380 size: 1.02" D x 1.48" L (26 D x 37.7 L mm) Motor Weight with Wires: 2.54 oz. (72 grams) Shaft Diameter: 1/8" (accepts all existing pinion gears) Bearing Size: Oversized (1/2" x 3/16") Front; Standard Rear (7mm x 3mm) Magnet: Sintered Nickel-plated Neodymium (one-piece, multi-pole cylindrical) Novak Pinion Gear Sets compatible with this system include; NOVC5200 11/12/13T NOVC5210 0.5 11/12/13T NOVC5201 14/15/16T NOVC5211 0.5 14/15/16T NOVC5202 17/18/19T NOVC5212 0.5 17/18/19T jxs 6/20/08 ir/jxs &