Mugen Seiki MUGE2015
$787.49
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1/8 MBX7R Nitro Buggy Kit (Off-Road)
Mugen brand Radio Controlled, Glow Powered, 1/8 scale
MBX7R 4WD Racing Buggy Kit from Mugen.
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES:
Chassis: A7075 hard anodized aluminum, 0.12 (3mm) thick
Drive: Four wheel with universal drive shafts
Differentials: Planetary geared with straight cut conical and ring
gears
Gearbox: Sealed, front and rear
Transmission: Single-speed
Shocks: Oil-filled 0.63 (16mm) diameter hard anodized aluminum
bodies, with 0.14 (3.5mm) diameter shafts
Shock Towers: A7075 aluminum, front, 0.20 (5mm) thick, rear
0.16 (4mm) thick
Steering: Fully adjustable with new geometry and servo saver,
trailing front axle position for better steering and overall feel
Ackerman: Adjustable, new steering Ackerman plate offers additional
steering tie rod holes for maximum adjustability, Ackerman refers
to the effect of the inside front wheel turning faster than the
outer front wheel during turns
Body: Clear, cab forward design with high-downforce wing
Wing Mount: New design allows wing to be moved closer to shock tower
for better traction and jumping
Brake:
Spur Gear: Lightweight 46T
Clutch Bell: --tooth, steel
Clutch Shoes: Three hardened aluminum, EO710
Front Suspension: Shortened upper arm for more camber adjustability
and the use of the E0161 spacer between the pillow ball and upper
arm
Fuel Tank: --oz (--cc), redesigned baffle to increase fuel pick up
and keep clunk positioned correctly
Camber Tie Rods: Adjustable, Camber describes the angle at which the
tires sit vertically
Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which
the tires point inward as viewed from above
YOU WILL RECEIVE:
MBX7R 4WD Racing Buggy Kit with Shocks, Body, Wing, Instruction
Manual
REQUIREMENTS:
Radio: 2-channel with high-torque steering servo
Engine: .21 class rear exhaust
Exhaust: Tuned pipe and manifold
Receiver Battery
Tires: 1/8 scale buggy with foam inserts
Wheels: 1/8 scale buggy
Fuel, glow starter, building and track equipment
SPECIFICATIONS:
Vehicle-
Length:
Width:
Wheelbase:
Body-
Length:
Width:
Height:
COMMENTS
For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
jxs 09/10/14
MBX7R 4WD Racing Buggy Kit from Mugen.
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES:
Chassis: A7075 hard anodized aluminum, 0.12 (3mm) thick
Drive: Four wheel with universal drive shafts
Differentials: Planetary geared with straight cut conical and ring
gears
Gearbox: Sealed, front and rear
Transmission: Single-speed
Shocks: Oil-filled 0.63 (16mm) diameter hard anodized aluminum
bodies, with 0.14 (3.5mm) diameter shafts
Shock Towers: A7075 aluminum, front, 0.20 (5mm) thick, rear
0.16 (4mm) thick
Steering: Fully adjustable with new geometry and servo saver,
trailing front axle position for better steering and overall feel
Ackerman: Adjustable, new steering Ackerman plate offers additional
steering tie rod holes for maximum adjustability, Ackerman refers
to the effect of the inside front wheel turning faster than the
outer front wheel during turns
Body: Clear, cab forward design with high-downforce wing
Wing Mount: New design allows wing to be moved closer to shock tower
for better traction and jumping
Brake:
Spur Gear: Lightweight 46T
Clutch Bell: --tooth, steel
Clutch Shoes: Three hardened aluminum, EO710
Front Suspension: Shortened upper arm for more camber adjustability
and the use of the E0161 spacer between the pillow ball and upper
arm
Fuel Tank: --oz (--cc), redesigned baffle to increase fuel pick up
and keep clunk positioned correctly
Camber Tie Rods: Adjustable, Camber describes the angle at which the
tires sit vertically
Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which
the tires point inward as viewed from above
YOU WILL RECEIVE:
MBX7R 4WD Racing Buggy Kit with Shocks, Body, Wing, Instruction
Manual
REQUIREMENTS:
Radio: 2-channel with high-torque steering servo
Engine: .21 class rear exhaust
Exhaust: Tuned pipe and manifold
Receiver Battery
Tires: 1/8 scale buggy with foam inserts
Wheels: 1/8 scale buggy
Fuel, glow starter, building and track equipment
SPECIFICATIONS:
Vehicle-
Length:
Width:
Wheelbase:
Body-
Length:
Width:
Height:
COMMENTS
For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
jxs 09/10/14
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov