MIP MIP3066

This is the MIP Engine Boost Bottle designed for .12 sized engines.
(.12 O.S. CV, CZ, Dynamite, TRA, and Thunder Tiger)

FEATURES:

Helps acceleration from idle to top end by neutralizing
the pressure difference between low and high ends
below the carburetor
Much smoother accelleration (no real increase in power)
Bottle chamber is made of aluminum (blue)
Supplied bracket allows the bottle to be mounted directly to your
vehicle

INCLUDES:

One Boost bottle (.52" diameter, 1.03" long)
One Mounting Bracket
One Pressure Fitting
One Pressure Tap (black)
One Silicone Tubing (about 3.5" long)
One Drill Bit
One Drill Guide Bushing
One Steel Lock Nut
One Straight Slot Screw
One Instructions

REQUIRES:

Drilling a hole on crankcase underneath the carburetor on engines
without a screw that threads directly into the carburetor. If the
engine has that screw then all that needs to be done is to replace
it (the screw) with a pressure tap.
JXR 02/10/99
ir/kh

this information was sourced from Great Planes Model Distributors