Kyosho KYO30216KWR

This is a 1/28 scale Kyosho Mini-Z, Subaru Impreza WRC racer.
(R/C Minimized Racing Car)
No Gluing or Painting, Race-Ready, Right Away!
Ready-to-run with pre-installed electronics and radio equipment.
Small size makes it easy to race in a small area.
Coil-over spring shock on front upper a-arms for realistic suspension
action.
High-grip rubber slick tires on stylish wheels.
Rear T-bar that compensates for any imperfections in the driving
surface to provide maximum traction. The T-bar also controls the
adjustable wheelbase.
F-130 electric motor delivers strong power output for exciting
racing, with adjustable mounting positions to increase traction or
add stability.
Rugged pre-painted polystyrene body.
Specially designed mini servo to provide fully proportional steering,
even at low speeds.
Receiver, servos and linkages are all pre-installed in the car for
convenience.
Kyosho Perfex KT-5 digital proportional 2-channel radio featuring:
Steering trim
A/B Throttle travel limiter
LED battery power indicator
Retractable antenna
Micro receiver with efficient, FET high-frequency amplifier.
One Micro Servo and high frequency electronic speed control.
Adjustable Wheelbases of 126mm, 130mm, 134mm
One Ready-To-Run Subaru Impreza WRC race car with
Perfex Radio System
One clear AutoScale display case
Three Extra Pinions (7T, 8T, 9T)
Three Motor Spacers for different pinions used
One Motor Case Mount B for optional high motor mounting
One Wheel/Pinion Wrench
One Instruction Manual
One set of optional Rally-style headlights (body drilling required)
Installing transmitter antenna into transmitter
Installing alkaline batteries into transmitter and car
(4) AAA size alkaline batteries for the car
(8) AA size alkaline batteries for the transmitter
Chassis-
length: 5.1" (130mm)
width: 2.6" (65mm)
height: 2.2" (56.5mm)
Weight: 5.8oz (163g) approximate overall
Minimum Turning Radius: 7.9" (200mm)
Body-
length: 6.25" (165.1mm)
Front width: 2.75" (70mm)
Rear width: 2.80" (71.1mm)
Wheelbase: 3.5" (88.9mm)
height: 1.9" (48.3mm)
The KT-5 Transmitter does not feature a charge jack.
Length of chassis is adjustable to accommodate different body sizes.
The adjustable wheel base lengths are:
Short 86mm
Medium 90mm
Length 94mm
Motor height is adjustable for different bodies.
For the optional bearing set, use DTXC1386.
Rally-style headlights are not available separately
NNA 6/01/03
ir/jxs
this information was sourced from Great Planes Model Distributors