Kyosho KYO31889T1B
$499.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued 1/8 Inferno Mp9 Tki3 Nitro Buggy 4wd RTR
Kyosho brand 1/8 scale Glow Powered, 2.4GHz Radio Controlled,
Ready to Run Readyset Inferno MP9 TKI 3 Buggy from Kyosho.
FEATURES:
Chassis: 0.12 (3mm) thick 7075 aluminum with wrap around side guards
molded front and rear chassis braces
Drive: Four wheel shaft with 3.5mm thick swing shafts, mud guards on
arms prevent dirt from entering drive shafts
Differentials: Three, high capacity center diff, narrow light weight
front and rear diffs
Radio: 2.4GHz Synchro KT-331P with high-torque waterproof steering
and throttle servos
Engine: KE21R .21 cu in (3.4cc) with pull starter, glow plug and
large capacity air filter
Exhaust: Polished aluminum tuned pipe
Shocks: 16mm Big Bore with tapered pistons, hardened steel bushings
Shock Towers: 0.12 (3mm) thick 7075 aluminum
Suspension: Independent double wishbone, adjustable roll center,
front & rear stabilizer bars
Brake Pads: Extra thick semi-metallic
Clutch: Two shoe
Wheels: MP9 white in color 3.3 (83.5mm) diameter, 1.6 (42mm)
wide, 17mm hex
Tires: Rubber construction with micro square pins 1.73 (44mm) wide
4.6 (116mm) diameter
Ball Bearings: Full set included
Fuel Tank: Includes splash guard, 4.2oz (125cc) capacity
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Radio Box: Low profile design protects components from dust and dirt
Body: 0.03 (0.8mm) thick clear untrimmed, flip top body system
allows easy maintenance, front inner fenders help protect chassis
from dirt, high downforce, screw mounted rear wing
Servo Mount: Upright for easy maintenance and dropped 2mm for better
center of gravity
YOU WILL RECEIVE:
RTR Inferno MP9 TKI 3 Buggy with Body, Decals, Wheels, Instructions,
Rear Wing, Fuel Tank, Air Filter, 2.4GHz Radio, .21 Engine with
Pull Starter, Tuned Pipe and Instruction Manual
REQUIREMENTS:
AA Batteries: Eight, four for transmitter, four for battery box
Glow Fuel: Car blend with 10-30% nitro content (20% required for
break-in
Fuel bottle, glow igniter
Maintenance and track equipment
SPECIFICATIONS:
Vehicle;
length: 19.2 (490mm)
width: 12.0 (307mm)
height: 7.1 (180mm)
Wheelbase: 12.7 (325mm) adjustable
Ground Clearance: 0.8 (28mm)
Gear Ratio: 11.7:1
Weight: 7.4lbs (3370g) approximately
Body;
length: 15 (378mm)
width: 8 (203mm)
height: 3.8 (96mm)
COMMENTS
For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
3 8x16mm Front Diff 2 DTXC1585
3 8x16mm Center Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
2 5x10mm Clutch Bell 1 DTXC1535
jxs 04/10/15
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov