Kyosho KYOBSW1
$20.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Drive bevel (s)
This is a Hardened Version of the Smaller of the Two Beveled Gears Used in the
Front and Rear Gearboxes of the KYOSHO INFERNO, TURBO INFERNO, INFERNO DX,
DX II and USA-1 Nitro Crusher. This gear is linked to the rear drive shaft
with a screw on coupler, KYOC3303.
Black Outer Coating to Prevent Corrosion.
Standard Course KYOSHO Pitch Teeth.
Direct Bolt-On Fit.
Beveled Gear (KYOC3322), the Diff Housing (KYOC3306)(this is the
inner part of gear) and use a Shim Set (KYOC5573) to adjust mesh.
outer diameter of .65" and a length of 1.65".
The more economical non-hardened version of this gear is KYOC3320.
WLG 10-21-98
ir/jl
Front and Rear Gearboxes of the KYOSHO INFERNO, TURBO INFERNO, INFERNO DX,
DX II and USA-1 Nitro Crusher. This gear is linked to the rear drive shaft
with a screw on coupler, KYOC3303.
FEATURES:
Hardened Material for Extra Strength.Black Outer Coating to Prevent Corrosion.
Standard Course KYOSHO Pitch Teeth.
Direct Bolt-On Fit.
INCLUDES:
One 15 tooth Hardened Beveled Gear.REQUIRES:
Part is a direct bolt on fit, but modeler must replace the LargerBeveled Gear (KYOC3322), the Diff Housing (KYOC3306)(this is the
inner part of gear) and use a Shim Set (KYOC5573) to adjust mesh.
SPECS:
Part has the same mounting dimensions and specs as the orginal, aouter diameter of .65" and a length of 1.65".
COMMENTS:
The hardened large drive gear is KYOC3322.The more economical non-hardened version of this gear is KYOC3320.
WLG 10-21-98
ir/jl
this information was sourced from Great Planes Model Distributors
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov