Kyosho KYO32629MB
$199.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Mini-Z Awd Ma-020 Series Readyset Nissan Skyline Gt-R V.Spec Ii
The chassis is equipped with the VCS front suspension for better road holding and smoother suspension stroke, and drift tires are mounted as standard, so it is ready for drifting out of the box. 14 pieces of ball bearings are installed to make the power train friction free, resulting in higher top speed, better fuel economy, and less motor loads and heat.
If you think drifting is difficult, no worries, you have a solution. The RX-ESC unit is equipped with a gyro socket and an adjustment volume. As soon as you install an optional gyro unit 2.0 (MZW446), you will quickly become a drifting expert. The gyro sensor detects the yaw rate of the car and automatically corrects the steering angle for you. So, even if you are not a skilled driver, you can surely enjoy smooth and fun drifting.
Also, it is very easy to adjust the gyro effect. You can increase or decrease the effect by just turning a tiny volume with a tool enclosed. No PC or any external equipment is necessary.
The set contains 20 pieces of red cones. Make a gymkhana course with them and sharpen your
drifting skills!
READY SET CONTENTS
Almost-factory-assembled chassis equipped with KT-531P compatible Rx-ESC unit
Pinion Gears (15T, 17T, 19T, 21T)
Spur Gears (27T, 29T, 31T)
Wheel wrench
REQUIRED FOR OPERATION
8 x AAA batteries
TECHNICAL DATA
Scale: 1/27.6
length: 167.0mm
width: 70.0mm
height: 46.0mm
Chassis Type: MA-020
Wheelbase: 94.0mm (L)
Tread (F):58.5
Tread (R):58.5mm
Weight: 192g
130 class motor
Gear Ratio: 7.2, 6.4, 6.0, 5.7, 5.3, 5.0, 4.5:1
Tire Diameter (F/R): 25.0mm/25.0mm
Tire Width (F/R):8.5mm/8.5mm
Transmitter: KT-531P
Top speed: approx. 17km/h
Runtime: approx. 50min
- Full ball bearings. (14 pieces)
- MA-020 based chassis with VCS front suspension
- 20 pieces of 25mm-height red cones included.
- Gyro control volume equipped on the RX unit for optional gyro unit
- Socket for Optional LED Unit (MZW429R) equipped on the RX unit.
If you think drifting is difficult, no worries, you have a solution. The RX-ESC unit is equipped with a gyro socket and an adjustment volume. As soon as you install an optional gyro unit 2.0 (MZW446), you will quickly become a drifting expert. The gyro sensor detects the yaw rate of the car and automatically corrects the steering angle for you. So, even if you are not a skilled driver, you can surely enjoy smooth and fun drifting.
Also, it is very easy to adjust the gyro effect. You can increase or decrease the effect by just turning a tiny volume with a tool enclosed. No PC or any external equipment is necessary.
The set contains 20 pieces of red cones. Make a gymkhana course with them and sharpen your
drifting skills!
READY SET CONTENTS
Almost-factory-assembled chassis equipped with KT-531P compatible Rx-ESC unit
Pinion Gears (15T, 17T, 19T, 21T)
Spur Gears (27T, 29T, 31T)
Wheel wrench
REQUIRED FOR OPERATION
8 x AAA batteries
TECHNICAL DATA
Scale: 1/27.6
length: 167.0mm
width: 70.0mm
height: 46.0mm
Chassis Type: MA-020
Wheelbase: 94.0mm (L)
Tread (F):58.5
Tread (R):58.5mm
Weight: 192g
130 class motor
Gear Ratio: 7.2, 6.4, 6.0, 5.7, 5.3, 5.0, 4.5:1
Tire Diameter (F/R): 25.0mm/25.0mm
Tire Width (F/R):8.5mm/8.5mm
Transmitter: KT-531P
Top speed: approx. 17km/h
Runtime: approx. 50min
FEATURES:
- KT-531P Transmitter (control knobs: steering/throttle trim, steering D/R, light flashing speed)- Full ball bearings. (14 pieces)
- MA-020 based chassis with VCS front suspension
- 20 pieces of 25mm-height red cones included.
- Gyro control volume equipped on the RX unit for optional gyro unit
- Socket for Optional LED Unit (MZW429R) equipped on the RX unit.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov