Kyosho KYO32282RG
$249.95
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.mb-010 Laser ZX-5 FS Red/grey
Specifications
* length: 163 mm * width: 105 mm, height: 46 mm; trace (v) *: 86.5 mm; trace (h) *: 88.5 mm * Wheelbase: 114.5 mm; tires (v / h): 34, 7x16 mm Motor: 130 size; RC System: 2.4GHz ASF; Chassis Type: MB-010
Description
The next level in Mini-Z Racing . . . ! After her life as an indoor mini-Z racers conquer the now, the outdoor terrain. Designed for use on turf, roads or smooth Lehmstrecken give the Mini-Z buggies now over jumps and on uneven terrain as the gas. No matter where you go with the model that you have control in your hand. The fully ball-bearing-wheel drive brings together the oil-filled shock absorbers and the individually mounted double wishbone suspension on the ground as a performance unequaled. Equipped with a dust-proof and differential power unit and a maintenance-free slipper clutch system, feels the Mini-Z stroller at home in any environment.
The Mini-Z buggies are equipped with the latest 2.4GHz wireless technology. It scans the remote control when you turn the entire frequency band and automatically selects a clear channel. Thus the denial of frequencies omitted among the drivers. A total of up to 40 models can be operated simultaneously. In this new system does not come more crystals are used. The frequencies are generated by a PLL synthesizer.
At the front sits a high-resolution digital servo that transmits the steering commands to the transmitter in a split second on the wheels. The front and rear wheels are independently mounted and spring loaded. The high-grip tires give the buggy racer uncompromising traction. In conjunction with the low center of gravity a breathtaking driving dynamics is achieved, which is on models of this size has never been achieved before.
The motherboard, the buggy racers already standard on the ICS interface. (Not supplied) with a special USB cable and software, the chassis can be configured via a computer. The setup data of the vehicle can be conveniently stored on the hard disk.
At the 2.4 GHz receiver control unit can optionally be a piezo gyro (sold separately) to increase the stability of the model. The piezo gyros registered vehicle movement around the vertical axis (skidding), long before they are visible to the human eye and controls within a split second it.
Another highlight of the Mini-Z is the buggy CHASE MODE. CHASE MODE limited in a limiter the car's performance to 70%. Is recommended when operating the third transmitter channel at this point the Perfex EX-5UR ASF, the Overtake mode provides an additional acceleration. For three seconds, then we have 100% power. There is the option, known as the Battle with LED Flasher to join. If the LED remains lit, the limiter is active. Blinking indicates that the Overtake mode is active. The percentages in the limiter can be adjusted via ICS interface.
The delivery of the Mini-Z is buggy without the 2.4 GHz transmitter (* except Readyset). For the operation of the models is the Kyosho Perfex KT-18 transmitter, Model No. 82001E required.
Features
MB-010 Mini-Z Racer Buggy with an efficient all-wheel drive
Motherboard with innovative 2.4GHz wireless technology
Full ball bearing drivetrain
Oil-filled shocks (to be filled with self-enclosed oil)
High-resolution digital steering servo with coreless motor
ICS-interface for connection to laptop
Wide steering angle for tight turning circle and excellent agility
Operation is no conventional quartz
Painted body with all the decorations (Fine Hand Polish)
Sophisticated front axle with a lot of mechanical grip and direct turn-in
High-resolution digital steering servo
Up to 40 vehicles can be operated simultaneously
Huge selection of tuning parts and car bodies
dust-proof gearbox and servo uniT-Maxximum durability
Maintenance-free slipper clutch to protect gears and drive train
Separate volume control and receiver unit for easy maintenance and possible future updates
Connection of piezo gyros
High-grip off-road tires
Extremely low center of gravity
CHASE MODE for exciting racing with turbo boost
Perfect look through detailed body
Driving without a pre-constructed chassis channels (including channel Readyset *)
Fully assembled chassis with 2.4GHz driving electronics
Factory-painted and decaled body
4 different motor pinion and main gears 2 to adjust the Antriebschrakteristik
Set of tools
2.4GHz wireless remote control Perfex KT-18 (* Readyset only)
4 pieces AAA 900mAh Team Orion AGM batteries, Order No. ORI13202 (model)
4 pieces 1100mAh RT AAA Team Orion batteries, Order No. ORI13201 (transmitter)
Perfex KT-18 2.4 GHz transmitter, Model No. EX-82001E or Perfex 5UR ASF 2.4 GHz transmitter, Model No. 82 011
EZ Charger Pro-Am Digital 12/230V, No. ORI30402
Target group
Beginners & pros Ambitious Racer
* length: 163 mm * width: 105 mm, height: 46 mm; trace (v) *: 86.5 mm; trace (h) *: 88.5 mm * Wheelbase: 114.5 mm; tires (v / h): 34, 7x16 mm Motor: 130 size; RC System: 2.4GHz ASF; Chassis Type: MB-010
Description
The next level in Mini-Z Racing . . . ! After her life as an indoor mini-Z racers conquer the now, the outdoor terrain. Designed for use on turf, roads or smooth Lehmstrecken give the Mini-Z buggies now over jumps and on uneven terrain as the gas. No matter where you go with the model that you have control in your hand. The fully ball-bearing-wheel drive brings together the oil-filled shock absorbers and the individually mounted double wishbone suspension on the ground as a performance unequaled. Equipped with a dust-proof and differential power unit and a maintenance-free slipper clutch system, feels the Mini-Z stroller at home in any environment.
The Mini-Z buggies are equipped with the latest 2.4GHz wireless technology. It scans the remote control when you turn the entire frequency band and automatically selects a clear channel. Thus the denial of frequencies omitted among the drivers. A total of up to 40 models can be operated simultaneously. In this new system does not come more crystals are used. The frequencies are generated by a PLL synthesizer.
At the front sits a high-resolution digital servo that transmits the steering commands to the transmitter in a split second on the wheels. The front and rear wheels are independently mounted and spring loaded. The high-grip tires give the buggy racer uncompromising traction. In conjunction with the low center of gravity a breathtaking driving dynamics is achieved, which is on models of this size has never been achieved before.
The motherboard, the buggy racers already standard on the ICS interface. (Not supplied) with a special USB cable and software, the chassis can be configured via a computer. The setup data of the vehicle can be conveniently stored on the hard disk.
At the 2.4 GHz receiver control unit can optionally be a piezo gyro (sold separately) to increase the stability of the model. The piezo gyros registered vehicle movement around the vertical axis (skidding), long before they are visible to the human eye and controls within a split second it.
Another highlight of the Mini-Z is the buggy CHASE MODE. CHASE MODE limited in a limiter the car's performance to 70%. Is recommended when operating the third transmitter channel at this point the Perfex EX-5UR ASF, the Overtake mode provides an additional acceleration. For three seconds, then we have 100% power. There is the option, known as the Battle with LED Flasher to join. If the LED remains lit, the limiter is active. Blinking indicates that the Overtake mode is active. The percentages in the limiter can be adjusted via ICS interface.
The delivery of the Mini-Z is buggy without the 2.4 GHz transmitter (* except Readyset). For the operation of the models is the Kyosho Perfex KT-18 transmitter, Model No. 82001E required.
Features
MB-010 Mini-Z Racer Buggy with an efficient all-wheel drive
Motherboard with innovative 2.4GHz wireless technology
Full ball bearing drivetrain
Oil-filled shocks (to be filled with self-enclosed oil)
High-resolution digital steering servo with coreless motor
ICS-interface for connection to laptop
Wide steering angle for tight turning circle and excellent agility
Operation is no conventional quartz
Painted body with all the decorations (Fine Hand Polish)
Sophisticated front axle with a lot of mechanical grip and direct turn-in
High-resolution digital steering servo
Up to 40 vehicles can be operated simultaneously
Huge selection of tuning parts and car bodies
dust-proof gearbox and servo uniT-Maxximum durability
Maintenance-free slipper clutch to protect gears and drive train
Separate volume control and receiver unit for easy maintenance and possible future updates
Connection of piezo gyros
High-grip off-road tires
Extremely low center of gravity
CHASE MODE for exciting racing with turbo boost
Perfect look through detailed body
Driving without a pre-constructed chassis channels (including channel Readyset *)
YOU WILL RECEIVE:
Fully assembled chassis with 2.4GHz driving electronics
Factory-painted and decaled body
4 different motor pinion and main gears 2 to adjust the Antriebschrakteristik
Set of tools
2.4GHz wireless remote control Perfex KT-18 (* Readyset only)
REQUIREMENTS:
4 pieces AAA 900mAh Team Orion AGM batteries, Order No. ORI13202 (model)
4 pieces 1100mAh RT AAA Team Orion batteries, Order No. ORI13201 (transmitter)
Perfex KT-18 2.4 GHz transmitter, Model No. EX-82001E or Perfex 5UR ASF 2.4 GHz transmitter, Model No. 82 011
EZ Charger Pro-Am Digital 12/230V, No. ORI30402
Target group
Beginners & pros Ambitious Racer
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov