Kyosho KYO30986B

$288.88
Kyosho logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
alternate part numbers:
1/12 Blizzard Sr RTR
Kyosho KYO30986B - 1/12 Blizzard Sr RTR
The Blizzard SR is based on a completely revised version of the popular Blizzard chassis. The SR is a pre-assembled model with a two motor setup. Powerful 380 motors transmit their power to drive the transmission block, each motor drives one track. Performance has been enhanced with a dual ESC and motor setup, powered by 2 380 size high torque motors giving you the power to climb, push and power over just about anything. This simple and efficient setup allows for more realistic and complex movements. A 3rd channel controls the all new snow plow that is included with the SR as standard equipment. A true fun vehicle for all types, skill levels and all types of terrains.

FEATURES:

New ESC: Newly developed high spec ESC units and lipo compatible.
Inner Cover: Dust and snow proof chassis design with inner covers covering all critical areas like gears, motors and ESC's.
Not water proof!
KS101BK : The Blizzard SR is equipped with a reliable KS101BK servo for the front plow.
380 : Two 380 size motors are pre-installed for easy control and high torque output.
Secured Battery : Two hook and loop tape straps secure the battery to the tray allowing for most stick type/size batteries to be used. Like 7.2/7.4v Lipo or NiMh)
Realistic : Two realistic tracks are on either side of the Blizzard SR, these tracks give you the freedom to run on, over, and through anything with ease.
Ready Set : The Blizzard SR is a fully assembled kit right out of the box with little to no prep time.
2.4Ghz Ready : The New KT-21 2.4Ghz Transmitter gives you the advantage and freedom to run when and where you want to with no worries.
YOU WILL RECEIVE:

Pre-Assembled Chassis
Pre-Painted Body
Two Pre Installed Motors and ESC set
Kyosho Perfex KT-21 2.4Ghz 2 Stick Transmitter
Manual Booklet
NOTE:

A Readyset is a fully assembled model that includes nearly everything you need to run. Body color scheme is complete so only consumables like batteries and a 7.4v Lipo or 7.2v NiMh is required so you can start operating the model without delay.
REQUIREMENTS:

8x AA-Size Batteries
7.2v NiMh 6cell Stick Pack or 7.4v Lipo with tamiya plugs
Proper Charger for proper type of battery
SPECIFICATIONS:

Scale: 1/12th
Length: NA
Width: NA
Height: NA
Gear Ratio: NA
Weight: NA
Motor: 380 size


description revised by: DB December 22, 2012
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov