Kyosho KYO30564JS
$159.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Awd nissan skyline GTR silver
Factory finished body is complete with colo-ring and decals.
Drive energy is transferred to the ground through high strength resin universal swing shafts with metal core.
Equipped with 4 precision ball bearings for high drive efficiency.
Includes 4 types of pinion gear and 3 types of spur gear for a wide range of gear ratio settings.
Includes collars that enable chassis height to be adjusted to low down setting.
Bump stop fitted to front to regulate suspension stroke and prevent tire and body contact.
Micro-edge precision finish to 1/100mm.
Easy-access diff unit can be removed/installed by simply loosening 4 screws on the front and 6 on the rear.
AWD lets you enjoy a controlled driving posture as you drift through turns.
Only 5g heavier than the MR-02 chassis series but features AWD and 4-wheel independent suspension.
Chassis design allows minimum width of 65mm so most body styles for MR-01 and MR-015 chassis can be used.
Wheelbase can be easily adjusted to the Mini-Z Racer M and L sizes so you can use those exquisite Mini-Z bodies you already own. (Some body shapes are not able to be used).
Regarding body fitting, the Mini-Z AWD shares the same dimensions as the MR-015. Therefore, the bodies that fit the MR-01 and MR-015 and their M and L-sized wheelbases can be used on the AWD.
The Mini-Z AWD uses specially designed wheels. These cannot be interchanged with the Mini-Z Racer wheels. Please choose from the wheels included in the AWD chassis set.
The wheels currently available with Auto Scale Collection are not suitable for the Mini-Z AWD. Please choose from the wheels included in the AWD chassis set.
The wiring on the motor used in the Mini-Z AWD is different to motors used in the current Mini-Z Racer Series up until now. Please use the AWD motor set.
Drive energy is transferred to the ground through high strength resin universal swing shafts with metal core.
Equipped with 4 precision ball bearings for high drive efficiency.
Includes 4 types of pinion gear and 3 types of spur gear for a wide range of gear ratio settings.
Includes collars that enable chassis height to be adjusted to low down setting.
Bump stop fitted to front to regulate suspension stroke and prevent tire and body contact.
Micro-edge precision finish to 1/100mm.
Easy-access diff unit can be removed/installed by simply loosening 4 screws on the front and 6 on the rear.
AWD lets you enjoy a controlled driving posture as you drift through turns.
Only 5g heavier than the MR-02 chassis series but features AWD and 4-wheel independent suspension.
Chassis design allows minimum width of 65mm so most body styles for MR-01 and MR-015 chassis can be used.
Wheelbase can be easily adjusted to the Mini-Z Racer M and L sizes so you can use those exquisite Mini-Z bodies you already own. (Some body shapes are not able to be used).
Regarding body fitting, the Mini-Z AWD shares the same dimensions as the MR-015. Therefore, the bodies that fit the MR-01 and MR-015 and their M and L-sized wheelbases can be used on the AWD.
The Mini-Z AWD uses specially designed wheels. These cannot be interchanged with the Mini-Z Racer wheels. Please choose from the wheels included in the AWD chassis set.
The wheels currently available with Auto Scale Collection are not suitable for the Mini-Z AWD. Please choose from the wheels included in the AWD chassis set.
The wiring on the motor used in the Mini-Z AWD is different to motors used in the current Mini-Z Racer Series up until now. Please use the AWD motor set.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov