Kyosho KYO30224MS
$148.00
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Ferrari f2002 #1 red f1
This is the 1/24th scale Kyosho Mini-Z Ferrari F2002 Racer.
(R/C Minimized Racing Car)
No gluing or painting, race-ready, right away!
Ready-to-run with pre-installed electronics and radio equipment.
Small size makes it easy to race in a small area.
Coil-over spring shock on front upper a-arms for realistic suspension
action.
Semi-pneumatic tires on stylish wheels.
Rear T-bar that compensates for any imperfections in the driving
surface to provide maximum traction. The T-bar also controls the
adjustable wheelbase.
Rugged, red Ferrari pre-painted polystyrene body.
Specially designed mini servo to provide fully proportional steering,
even at low speeds.
Receiver, servos and linkages are all pre-installed in the car for
convenience.
Kyosho Perfex digital proportional 2-channel radio has the following:
Adjustable steering dual rate.
Steering and throttle trims.
Servo reversing switch.
LED battery power indicator.
Retractable antenna.
Charging jack for optional NiCD rechargeable battery (not included)
(See COMMENTS)
Micro receiver with efficient, FET high-frequency amplifier.
One Micro Servo and high frequency electronic speed control.
Adjustable Wheelbases of 126mm, 130mm, 134mm
One Ready-to-Run Ferrari F2002 Race Car with
Perfex KT-2 Radio System
One Motor Case Mount B for optional high motor mounting
One Wheel/Pinion Wrench
One Instruction Manual
Attaching the body to the chassis
Installing transmitter antenna into transmitter
Installing alkaline batteries into transmitter and car
(4) AAA size alkaline batteries for the car
(8) AA size alkaline batteries for the transmitter
Chassis-
length: 5.1" (130mm)
width: 2.6" (65mm)
height: 2.2" (56.5mm)
Weight: 5.8oz (163g)(approximately overall)
Minimum Turning Radius: 7.9" (200mm)
Body-
length: 6.5" (167mm)
width: 2.6" (67mm)
Wheelbase: 3.7" (94mm)
height: 1.7" (44mm)
Charging Jack is functional. Use a Futaba-style transmitter
charging system with this jack, HCAP6010 or DTXP4010.
Length of chassis is adjustable to accommodate different body sizes.
The adjustable wheel base lengths are:
Short 86mm
Medium 90mm
Length 94mm
Motor height is adjustable for different bodies.
For the optional bearing set, use DTXC1386.
kh01-03-02
ir/kh
this information was sourced from Great Planes Model Distributors
(R/C Minimized Racing Car)
No gluing or painting, race-ready, right away!
FEATURES:
Ready-to-run with pre-installed electronics and radio equipment.
Small size makes it easy to race in a small area.
Coil-over spring shock on front upper a-arms for realistic suspension
action.
Semi-pneumatic tires on stylish wheels.
Rear T-bar that compensates for any imperfections in the driving
surface to provide maximum traction. The T-bar also controls the
adjustable wheelbase.
Rugged, red Ferrari pre-painted polystyrene body.
Specially designed mini servo to provide fully proportional steering,
even at low speeds.
Receiver, servos and linkages are all pre-installed in the car for
convenience.
Kyosho Perfex digital proportional 2-channel radio has the following:
Adjustable steering dual rate.
Steering and throttle trims.
Servo reversing switch.
LED battery power indicator.
Retractable antenna.
Charging jack for optional NiCD rechargeable battery (not included)
(See COMMENTS)
Micro receiver with efficient, FET high-frequency amplifier.
One Micro Servo and high frequency electronic speed control.
Adjustable Wheelbases of 126mm, 130mm, 134mm
INCLUDES:
One Ready-to-Run Ferrari F2002 Race Car with
Perfex KT-2 Radio System
One Motor Case Mount B for optional high motor mounting
One Wheel/Pinion Wrench
One Instruction Manual
REQUIREMENTS:
Attaching the body to the chassis
Installing transmitter antenna into transmitter
Installing alkaline batteries into transmitter and car
(4) AAA size alkaline batteries for the car
(8) AA size alkaline batteries for the transmitter
SPECIFICATIONS:
Chassis-
length: 5.1" (130mm)
width: 2.6" (65mm)
height: 2.2" (56.5mm)
Weight: 5.8oz (163g)(approximately overall)
Minimum Turning Radius: 7.9" (200mm)
Body-
length: 6.5" (167mm)
width: 2.6" (67mm)
Wheelbase: 3.7" (94mm)
height: 1.7" (44mm)
COMMENTS:
Charging Jack is functional. Use a Futaba-style transmitter
charging system with this jack, HCAP6010 or DTXP4010.
Length of chassis is adjustable to accommodate different body sizes.
The adjustable wheel base lengths are:
Short 86mm
Medium 90mm
Length 94mm
Motor height is adjustable for different bodies.
For the optional bearing set, use DTXC1386.
kh01-03-02
ir/kh
this information was sourced from Great Planes Model Distributors
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov