Kyosho KYO30222JM

This is the Kyosho F1 Series Mini-Z featuring the Team
Williams/BMW vehicle #6 from the 2002 F1 racing season.
No gluing or painting, race-ready, right away!
Ready-to-run with pre-installed electronics and radio equipment.
Small size makes it easy to race in a small area.
Coil-over spring shock on front upper a-arms for realistic suspension
action.
Semi-pneumatic ridged tires on stylish wheels.
A 4-pinion set that allows you to gear up/down for different track
conditions.
Rear T-bar that compensates for any imperfections in the driving
surface to provide maximum traction. The T-bar also controls the
adjustable wheelbase.
Stock electric motor delivers strong power output for exciting
racing, with adjustable mounting positions to increase traction or
add stability.
Rugged pre-painted polystyrene body.
Specially designed mini servo to provide fully proportional steering,
even at low speeds.
Receiver, servos and linkages are all pre-installed in the car for
convenience.
Kyosho Perfex digital proportional 2-channel radio has the following:
Adjustable steering dual rate.
Steering and throttle trims.
Servo reversing switch.
LED battery power indicator.
Retractable antenna.
Charging jack for optional NiCD rechargeable battery (see COMMENTS)
Micro receiver with efficient, FET high-frequency amplifier.
One Micro Servo and high frequency electronic speed control, that
provides, forward, reverse AND braking.
Adjustable Wheelbases of 126mm, 130mm, 134mm
One Ready-To-Run Williams/BMW F1 Mini-Z Race Car with
Perfex KT-2 Radio System
One Receiver Antenna set
Three Extra Pinions (7T, 8T, and 9T)
Three Motor Spacers for different pinions used
One Wheel/Pinion Wrench
One Clear Front Protective Bumper
One Tire Decal Set featuring "Michelin" tires
One Instruction Manual
Installing transmitter antenna into transmitter
Installing Receiver antenna to vehicle
Installing alkaline batteries into transmitter and car
(4) AAA size alkaline batteries for the car
(8) AA size alkaline batteries for the transmitter
Chassis length: 182mm (7.2")
Chassis width: 82mm (3.2")
Front Track: 68mm (2.7")
Rear Track: 66mm (2.6")
Wheelbase: 130mm (5.1")
Weight: 190g (0.4lb)
Motor: 130 class
Front Tires: 27x14mm (1.1"x.55")
Rear Tires: 27x16mm (1.1"x.62")
For optional rechargable Transmitter NiCD Batteries, use DTXP4010
Length of chassis is adjustable to accommodate different body sizes.
The adjustable wheel base lengths are:
Short 86mm
Medium 90mm
Length 94mm
NNA 1/09/02
ir/jxs
this information was sourced from Great Planes Model Distributors