Kyosho KYO30204KR
$128.00
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued Red ferrari f40
This is a 1/28 scale Kyosho Mini-Z, Red Ferrari F40. (R/C Minimized Racing Car) No gluing or painting, race-ready, right away!
Ready-to-run with pre-installed electronics and radio equipment.
Small size makes it easy to race in a small area.
Coil-over spring shock on front upper a-arms for realistic suspension
action.
High-grip rubber slick tires on stylish wheels.
Rear T-bar that compensates for any imperfections in the driving
surface to provide maximum traction. The T-bar also controls the
adjustable wheelbase.
FA-130 electric motor delivers strong power output for exciting
racing, with adjustable mounting positions to increase traction or
add stability.
Rugged Ferrari F40 pre-painted polystyrene body.
Specially designed mini servo to provide fully proportional steering,
even at low speeds.
Receiver, servos and linkages are all pre-installed in the car for
convenience.
Kyosho Perfex digital proportional 2-channel radio has the following:
Adjustable steering dual rate.
Steering and throttle trims.
Servo reversing switch.
LED battery power indicator.
Retractable antenna.
Charging jack for optional NiCD rechargeable battery (not included)
(See COMMENTS)
Micro receiver with efficient, FET high-frequency amplifier.
One Micro Servo and high frequency electronic speed control.
Adjustable Wheelbases of 126mm, 130mm, 134mm
Perfex KT-2 radio system
tree orange road cone pylons
three orange road marker discs
three extra pinions (7T, 8T, 9T)
three motor spacers for different pinions used
One motor case mount B for optional high motor mounting
One wheel/pinion wrench
One instruction manual
Attaching the body to the chassis
Installing transmitter antenna into transmitter
Installing alkaline batteries into transmitter and car
(4) AAA size alkaline batteries for the car
(8) AA size alkaline batteries for the transmitter
Chassis-
length: 5.1" (130mm)
width: 2.6" (65mm)
height: 2.2" (56.5mm)
Weight: 5.8oz (163g)(approximately overall)
minimum turning radius: 7.9" (200mm)
Body-
length: 6.6" (167mm)
width: 2.6" (67mm)
Wheelbase: 3.5" (90mm)
height: 1.5" (40mm)
Charging jack is functional. Use a Futaba-style transmitter
charging system with this jack, HCAP6010 or DTXP4010.
Length of chassis is adjustable to accommodate different body sizes.
The adjustable wheel base lengths are:
Short 86mm
Medium 90mm
Length 94mm
Motor height is adjustable for different bodies.
For the optional bearing set, use DTXC1386.
KPM 1/03/03
ir/jxs
this information was sourced from Great Planes Model Distributors
FEATURES:
Small size makes it easy to race in a small area.
Coil-over spring shock on front upper a-arms for realistic suspension
action.
High-grip rubber slick tires on stylish wheels.
Rear T-bar that compensates for any imperfections in the driving
surface to provide maximum traction. The T-bar also controls the
adjustable wheelbase.
FA-130 electric motor delivers strong power output for exciting
racing, with adjustable mounting positions to increase traction or
add stability.
Rugged Ferrari F40 pre-painted polystyrene body.
Specially designed mini servo to provide fully proportional steering,
even at low speeds.
Receiver, servos and linkages are all pre-installed in the car for
convenience.
Kyosho Perfex digital proportional 2-channel radio has the following:
Adjustable steering dual rate.
Steering and throttle trims.
Servo reversing switch.
LED battery power indicator.
Retractable antenna.
Charging jack for optional NiCD rechargeable battery (not included)
(See COMMENTS)
Micro receiver with efficient, FET high-frequency amplifier.
One Micro Servo and high frequency electronic speed control.
Adjustable Wheelbases of 126mm, 130mm, 134mm
YOU WILL RECEIVE:
One ready-to-run red Ferrari F40 Mini-Z race car withPerfex KT-2 radio system
tree orange road cone pylons
three orange road marker discs
three extra pinions (7T, 8T, 9T)
three motor spacers for different pinions used
One motor case mount B for optional high motor mounting
One wheel/pinion wrench
One instruction manual
REQUIREMENTS:
Installing transmitter antenna into transmitter
Installing alkaline batteries into transmitter and car
(4) AAA size alkaline batteries for the car
(8) AA size alkaline batteries for the transmitter
SPECIFICATIONS:
length: 5.1" (130mm)
width: 2.6" (65mm)
height: 2.2" (56.5mm)
Weight: 5.8oz (163g)(approximately overall)
minimum turning radius: 7.9" (200mm)
Body-
length: 6.6" (167mm)
width: 2.6" (67mm)
Wheelbase: 3.5" (90mm)
height: 1.5" (40mm)
COMMENTS:
charging system with this jack, HCAP6010 or DTXP4010.
Length of chassis is adjustable to accommodate different body sizes.
The adjustable wheel base lengths are:
Short 86mm
Medium 90mm
Length 94mm
Motor height is adjustable for different bodies.
For the optional bearing set, use DTXC1386.
KPM 1/03/03
ir/jxs
this information was sourced from Great Planes Model Distributors
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov