The ultimate tool for dominating Drag Racing!
Powerful Performance: High-performance hardware and software tailored specifically for Drag Racing.
Ready to Race: Comes with factory standard 10AWG silicone wires and a super large capacitor module-everything you need is included.
Customizable RPM Control: Fine-tune RPM limits by throttle with adjustable boost start and end RPM for optimal performance.
Comprehensive Protection: Features low-voltage cutoff, ESC and motor thermal protection, and fail-safe mechanisms for enhanced safety.
Data-Driven Insights: Utilize the OTA Bluetooth module to record and analyze running data via the HW LINK App on your mobile device.
Easy Firmware Upgrades: Upgrade firmware effortlessly using the Hobbywing LCD Pro program box or OTA Programmer (sold separately).
Motor KV: 6500KV
LiPo: 2S
No-Load Current (A): 8.0A
Diameter/Length (mm): D=36mm (1.42in) / L=63mm (2.48in)
Shaft Diameter/Length (mm): D=5.0mm (0.20in) / L=18.5mm (0.73in)
Bearing Size (mm): Front: D11*D5*T5 / Rear: D8*D3*T4
Poles: 4
Weight (g): 240g
Applications: 1/10 Drag Racing
Motor Cont. /Peak Current: 200A / 1200A
Motor Type: Sensored Brushless Motors
Applications: 1/10th Drag Racing
Recommended Motor: 3652/3662 (540/550)
LiPo Cells: 2S LiPo
BEC Output: 5-7.4V Adjustable, Continuous Current of 5A
Cooling Fan: Powered by the stable BEC voltage
Size: 37.7 x 37.2 x 33.2mm (w/Fan & Fan Shroud)
Weight: 137g (w/Wires)
Programming Port: Independent programming interface