Hitec/RCD HRC44209
$179.95
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Hitec X1-200 Touch Battery Charger
Hitec X1-200 Touch Battery Charger made by Hitec/RCD
With a 3.2-inch LCD touch screen, integrated cell balancer and automatic current adjustment, this 200-watt charge/discharge station has the ability to operate on a 12V automotive battery or 11~18 volt DC power supply. The X1-200 Touch package includes a universal balancing board with paired cable, two alligator clips and a 2-pin t-type charging cable. Easy to use and easy to setup, it is a convenient, proficient charging solution.
44209 Hitec X1-200 Touch Multi-Charger
DC Power Cord
Alligator Clips
2-pin T-type Charging Cable
Universal Balancing Cable / Board
Instruction Manual
- Touch screen interface system
- Charging status monitor
- Optimized operating software
- Dual power input
- Internal independent lithium battery balancer
- Balancing of individual lithium cells
- Accommodates most popular types of lithium batteries
- Fast and storage modes for lithium batteries
- Cyclic charging/discharging
- Data store/load
- Memory preset
- Termination voltage control
- Re-peak mode of NiMh /NiCd batteries
- Delta-peak mode for NiMh /NiCd
- Automatic charging current limit
Charge circuit power: 200 watts
Discharge current power: 40 watts
Current drain for balancing port: 200mA per cell
NiCd/ NiMh Battery cell count: 1-15 cells
LiPo/LiFe/LiIon cell count: 1-6 cells
Pb battery voltage: 2-20V
With a 3.2-inch LCD touch screen, integrated cell balancer and automatic current adjustment, this 200-watt charge/discharge station has the ability to operate on a 12V automotive battery or 11~18 volt DC power supply. The X1-200 Touch package includes a universal balancing board with paired cable, two alligator clips and a 2-pin t-type charging cable. Easy to use and easy to setup, it is a convenient, proficient charging solution.
YOU WILL RECEIVE:
44209 Hitec X1-200 Touch Multi-Charger
DC Power Cord
Alligator Clips
2-pin T-type Charging Cable
Universal Balancing Cable / Board
Instruction Manual
FEATURES:
- Touch screen interface system
- Charging status monitor
- Optimized operating software
- Dual power input
- Internal independent lithium battery balancer
- Balancing of individual lithium cells
- Accommodates most popular types of lithium batteries
- Fast and storage modes for lithium batteries
- Cyclic charging/discharging
- Data store/load
- Memory preset
- Termination voltage control
- Re-peak mode of NiMh /NiCd batteries
- Delta-peak mode for NiMh /NiCd
- Automatic charging current limit
SPECIFICATIONS:
Charge circuit power: 200 watts
Discharge current power: 40 watts
Current drain for balancing port: 200mA per cell
NiCd/ NiMh Battery cell count: 1-15 cells
LiPo/LiFe/LiIon cell count: 1-6 cells
Pb battery voltage: 2-20V
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov