Hitec/RCD HRC44177

Hitec/RCD brand Hitec Multi Function Touch AC/DC Multi Charger.
Charges 1-6 cell LiPo, LiFe and Li-Ion batteries
1-15 cell NiCd and NiMh batteries and
2-20V Pb (lead acid) cells
Operates on 11-18V DC or 100-240V AC power sources
3.2 high resolution touch screen for effortless data monito-ring and
retrieval
AUTO function automatically adjusts current during charging and
discharging to prevent overcharging-charger disconnects the circuit
automatically and sound an audible alarm when detecting abnormal
voltage or current loads
Internal independent lithium battery balancer
Fast and Storage lithium battery charge modes
Balance board with balance plug sockets for JST-EH, JST-XH,
Thunder Power/Flight Power, and Hyperion/Polyquest balance plugs
on 3S, 4S, 5S, or 6S batteries. There are also sockets for
JST-EH, JST-XH, and Tamiya LiFe balance plugs.
Delta peak voltage detection for NiCd and NiMh batteries
Re-peak mode for NiMh and NiCd batteries ensures batteries are fully
charged and checks how well the battery receives fast charges
Capacity limit
Temperature threshold function terminates charging if battery
becomes too warm, requires Temperature Sensor, (HRCP4159) not
included
Data storage for up to five batteries
One year limited warranty against material or operational defects
which are present at the time of purchase
Charger with AC Power Cord, Charge Lead with XT60 type DC
Connector, Charge Lead with Deans type Connector, Balancing Board
Cable, Universal Balance Board, and Instruction Manual
AC Input: 100-240V
DC Input: 11-18V
Circuit Power: Max. Charge Power 55W
Max. Discharge Power 5W
Charge Current Range: 0.1-7A
Discharge Current Range: 01-2.0A
Discharge Current Power: 5W
Current Drain for Balancing LiPo: 200mA/cell
NiCd/ NiMh Battery Cell Count: 1-15 cells
LiPo/LiFe LiIon Cell Count: 1-6 cells
Pb Battery Voltage: 2-20V
Net Weight: 19oz (538.6g)
5.5 x 6.5 x 2.4 (140 x 165 x 60.9mm)
jxs 06/27/13
ir/jxs