Hitec/RCD HRC35955J

This is the HiTec HS-5955TG Titanium Gear, Coreless digital
Multipurpose Servo.

FEATURES:

Programmable digital amplifer with MOSFET drive(programmable features
require the HFP-10 programmer - HRCM4410 see comments)
Coreless motor, a conventional servo motor has a steel core armature
wrapped with with wire that spins inside magnets. In a coreless
design, the armature uses a thin wire mesh that forms a cup that
spins around the outside of the magnet eliminating the heavy steel
core. This design is much lighter resulting in smoother operation
and faster response time.
Dual ball bearings
Titanium-Alloy gear set
Ultra hard servo gear shafts with 2 axial brass case bushings
Water and dust resistant
Futaba J connector
Metal heatsink,middle case

INCLUDES:

One HS-5955TG servo
One 2.75" (45mm) diameter heavy-duty servo horn (wheel)
One 2.73" (72mm) long heavy-duty dual sided servo arm
One 2.36" (60mm) long heavy-duty dual side servo arm
One 1.57" (40mm) long heavy-duty single side servo arm
One 1.25" (32mm) long heavy-duty single side servo arm(pre-installed)
Four rubber gromets
Four brass eyelets
Four mounting screws

REQUIRES:

Installing into your model
HPF-10 programmer - HRCM4410 (for programming servo- see comments)

SPECS:

Torque: 4.8V 250 oz-in (18 kg-cm) 6V 333 oz-in (24 kg-cm)
Speed: 4.8V 0.19 seconds 6V 0.15 seconds
Weight: 2.18oz (62 grams)
Length: 1.6" (40mm) Width: .8" (20mm) Height: 1.4" (37mm)

COMMENTS:

With the HiTec HFP-10 Programmer (HRCM4410) the following things can
be programmed on this servo:
Factory Default Resets Fail Safe on-off
Dead Band Width Adjustments End Point
Directional Rotation Neutral Point
Speed of Rotation Fail Safe Point Preset
The following replacement parts are currently available for this
servo: Heatsink case - HRCM5804 and Horn set - HRCM5009
kpm01/15/2005

this information was sourced from Great Planes Model Distributors