Hitec/RCD HRC35945S

This is the Hitec D-Series Dynamo D-945TW Wide Voltage Multipurpose Titanium Gear Servo. For 20-120 class aircraft, all EP 600-700 class helicopters, all GP 30-90 class helicopters, 1-10-1/4 scale vehicle steering and throttle, and nitro and gasoline powered boats Durable titanium alloy metal gears with dual ball bearings Ultra hard gear shaft with three axial metal bushings 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility *Programmable digital amplifier with MOSFET drive Water and dust resistant (splash proof) Metal center heat sink D-945TW Wide Voltage Multipurpose Servo 0.98" (25mm) Single Arm 1.7" (44mm) Double Arm 1.5" (38mm) 4-Point Horn 1.4" (36mm) Round Horn Four each Grommets, Eylets and Mounting Screws Metal Adapter Ring, extra Horn Screw 4.8V 6.0V 7.4V Speed: 0.16 0.12 0.10 sec/60° Torque: 194.42 250 319.40 oz-in 14 18 23 kg-cm Motor Type: Coreless 1.57 x 0.79 x 1.50" (40 x 20 x 38mm) Weight: 2.40 oz (68.0g) Number of Teeth on Spline: 25 Diameter of Horn Screw: 3mm *Programmable features require Hitec Servo Programmer sold separately HFP-30, DPC-11, HRCP4429 A note on Coreless motors: conventional servo motors have a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a thin wire mesh that forms a cup that spins around the outside of the magnet eliminating the heavy steel core. This design results in smoother operation and faster response time. jxs 11/24/15 ir/jxs &