Hot Racing SCP39L01
$38.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Dig Unit for Stock Axial Transmission
Hot Racing dig unit kit for the AX10 transmission allows the rear wheel drive to be remotely disengaged for front wheel digs. Digs are useful to pivot and swing the front of the vehicle in tight spaces.
- A third channel on the radio allows the dig unit to function remotely
- Linear bushings for smooth shift action
- Hardened steel outdrive and output shaft
- Aluminum servo mounting plate and servo mount posts
- Black anodized aluminum components
- One (1) steel transmission outdrive dog
- One (1) servo mounting plate
- Two (2) servo mount posts
- Shift linkage
- Installation hardware
- Standard servo and servo arm
- Three or more channel radio system
- Rear plastic telescoping drive shaft needs to be cut
- Light oiling of the shift bushings
- SCX10 needs Hot-Racing SCP39SM01, On Board Servo Mount
- Medium thread lock (e. g. blue Loctite) on screws
- Servo mounting plate distance between end holes: 116.5mm
- Servo mounting plate slots centered on square pattern: 40x81mm
description revised by: SN June 18, 2018
FEATURES:
- Allows rear wheel drive to be remotely disengaged for front wheel digs- A third channel on the radio allows the dig unit to function remotely
- Linear bushings for smooth shift action
- Hardened steel outdrive and output shaft
- Aluminum servo mounting plate and servo mount posts
- Black anodized aluminum components
YOU WILL RECEIVE:
- One (1) dig unit shift box- One (1) steel transmission outdrive dog
- One (1) servo mounting plate
- Two (2) servo mount posts
- Shift linkage
- Installation hardware
REQUIREMENTS:
- Axial AX10 AX80009 gearbox (shown but not included)- Standard servo and servo arm
- Three or more channel radio system
- Rear plastic telescoping drive shaft needs to be cut
- Light oiling of the shift bushings
- SCX10 needs Hot-Racing SCP39SM01, On Board Servo Mount
- Medium thread lock (e. g. blue Loctite) on screws
SPECIFICATIONS:
- Servo mounting plate: 48x128mm- Servo mounting plate distance between end holes: 116.5mm
- Servo mounting plate slots centered on square pattern: 40x81mm
description revised by: SN June 18, 2018
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov