Hot Racing RVO133S06
$18.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Stainless Steel Wheelie Bar - E-Revo Revo Slayer Summit
Hot Racing wheelie bar for the 1/10th TRA E-Revo, Revo 3.3, Slayer Pro 4X4, and Summit
- Blue anodized aluminum spacers/washers
- Tires are hard solid rubber
- Four (4) flat head cap screws
- Two (2) 6 x 14 mm collars
- Two (2) 6 x 5 mm collars
- Four (4) cone washers
- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tires have a pressed steel hub bushing that may be glued to the tire if the hub slips
- Width between tires: 2.75 inch (70mm)
- Tire diameter: 31mm
- Tire width: 8mm
description revised by: SN June 29, 2015
FEATURES:
- Wheelie bar is stainless steel construction- Blue anodized aluminum spacers/washers
- Tires are hard solid rubber
YOU WILL RECEIVE:
- One (1) wheelie bar assembly- Four (4) flat head cap screws
- Two (2) 6 x 14 mm collars
- Two (2) 6 x 5 mm collars
- Four (4) cone washers
REQUIREMENTS:
- Installation onto vehicle- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tires have a pressed steel hub bushing that may be glued to the tire if the hub slips
SPECIFICATIONS:
- Horizontal length: 7.2 inch (183mm)- Width between tires: 2.75 inch (70mm)
- Tire diameter: 31mm
- Tire width: 8mm
COMMENTS:
- See Hot Racing RWB1330 for replacement/spare tiresdescription revised by: SN June 29, 2015
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov