Hot Racing MH404TF
$48.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.40mm Twister Motor Cooling Fan with plug 1/7 1/8
Hot Racing Twister Blower Ball bearing 7 blade 40x40x28mm large cooling
fan for custom cooling needs or as a replacement for the Hot Racing
AON404TP Monster Blower Fan cooling system.
This is the Hot Racing Twister Blower clip-on universal heat sink and fan for the 1/8, 1/7 Arrma Felony, infraction limitless, mojave . Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX or custom projects.
- Large 40x40x28mm 7-blade fan
- Clip-on design for simple installation
- Black anodized aluminum heat sink provides efficient heat transfer
- Adapter with EC5
- 12AWG and 24 AWG silicone wire
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- For off road Ensure fan blades are protected
- This system uses a EC-5 Connector. If your system uses another type of connector, you'll have to switch connectors, or use an adapter.
- Input Voltage: 11.1V (12V max)
- Lead length: ~170mm (may vary)
- Mounting pattern: M3x32mm square
- Replacement Hot Racing fan is RAON404FP
fan for custom cooling needs or as a replacement for the Hot Racing
AON404TP Monster Blower Fan cooling system.
This is the Hot Racing Twister Blower clip-on universal heat sink and fan for the 1/8, 1/7 Arrma Felony, infraction limitless, mojave . Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX or custom projects.
FEATURES:
- 12, 000 RPM Forced airflow over motor heat sink to increase cooling for improved efficiency and performance- Large 40x40x28mm 7-blade fan
- Clip-on design for simple installation
- Black anodized aluminum heat sink provides efficient heat transfer
- Adapter with EC5
- 12AWG and 24 AWG silicone wire
YOU WILL RECEIVE:
- One (1) fan with PlugREQUIREMENTS:
- Installation- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- For off road Ensure fan blades are protected
- This system uses a EC-5 Connector. If your system uses another type of connector, you'll have to switch connectors, or use an adapter.
SPECIFICATIONS:
- Size: 40x40x28.9mm- Input Voltage: 11.1V (12V max)
- Lead length: ~170mm (may vary)
- Mounting pattern: M3x32mm square
COMMENTS:
- If you are using single 6 cell pack DO NOT use this system. - Replacement Hot Racing fan is RAON404FP
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov