Hot Racing LST9880
$9.88

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued 8.0 Lb gunmetal Monster Lift Spring
Hot Racing "cold-coiled" Monster High Lift spring is designed to support all the monster LST load at Monster high lift. The original spring is not heavy duty and is often fatigued early by heavy Upgrade and with oversized tires High lift spring gained about 10 % of lift and ground clearance.
Hot Racing LST spring have a distinctive, chip-resistant finish that does not affect the performance. These Lift Springs will add stiffness and decrease body roll.
tMonster lifgunmetal 6.5 T 98mm 2.5 mm wire High Lift spring 8 LB/in
Silver Stock 90mm 2.3mm wire 3lb/in
comes in 2 to a pack
Coil springs can be either "hot-coiled" or "cold-coiled". Cold-coiled springs are more precise, Hot Racing cold coiled springs are wound from pre-heat treated spring wire stock. Many so call performance springs are cold-coiled from annealed "bundle stock" then quenched and tempered after coiling. This method produces a less accurate spring and can result in surface imperfections.
After coiling, the closed ends are ground, Completed springs are inspected, powder-coated or plated then checked for dimensions, trueness and rate
Hot Racing LST spring have a distinctive, chip-resistant finish that does not affect the performance. These Lift Springs will add stiffness and decrease body roll.
tMonster lifgunmetal 6.5 T 98mm 2.5 mm wire High Lift spring 8 LB/in
Silver Stock 90mm 2.3mm wire 3lb/in
comes in 2 to a pack
Coil springs can be either "hot-coiled" or "cold-coiled". Cold-coiled springs are more precise, Hot Racing cold coiled springs are wound from pre-heat treated spring wire stock. Many so call performance springs are cold-coiled from annealed "bundle stock" then quenched and tempered after coiling. This method produces a less accurate spring and can result in surface imperfections.
After coiling, the closed ends are ground, Completed springs are inspected, powder-coated or plated then checked for dimensions, trueness and rate