HPI HPI105424
$103.49
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.TF-45/RF-45 Radio Set
HPI Racing brand HPI 2.4GHz TF-45 FHSS 3-Channel Digital RC System
with the RF-45 Receiver.
FEATURES:
Designed for nitro and gasoline powered vehicles (may be used with
electric powered vehicles when paired with the RF-40 receiver)
Frequency-Hopping Spread Spectrum (FHSS) digital 2.4GHz radio
technology
Third channel switch
Drop down padded steering wheel for racing feel and easier access to
all adjustments
Easy binding with the HPI RF-40 and RF-45 receiver
Adjustable failsafe settings with the RF-45 receiver
End Point Adjustment (EPA) for steering and throttle
Steering dual rate adjustment
Throttle and steering trim adjustment
Small door on rear of transmitter for screwdriver storage
Blinking low battery indicator
LiPo or NiMH battery type switch on receiver that sets low voltage
fail safe cut-off limit
YOU WILL RECEIVE:
HPI 2.4GHz TF-45 Transmitter with Instruction Manual
RF-45 Receiver, HPIL5422
REQUIREMENTS:
Four AA batteries
Servos of modeler's choice
On-Off Switch
SPECIFICATIONS:
Transmitter-
Frequency: 2.4GHz
Radio Wave Type: FHSS
Weight: 15.9oz (450g)
RF-45 Receiver-
Frequency: 2.4GHz
Fail Safe: LiPo or NiMH battery type switch
Battery Requirement: 6V NiMH or 7.4V 2S LiPo
Dimensions: 1.3 x 1.02 x 0.51 (33 x 26 x 13mm)
Weight: 0.28oz (8g)
jxs 12/16/15
ir/jxs
with the RF-45 Receiver.
FEATURES:
Designed for nitro and gasoline powered vehicles (may be used with
electric powered vehicles when paired with the RF-40 receiver)
Frequency-Hopping Spread Spectrum (FHSS) digital 2.4GHz radio
technology
Third channel switch
Drop down padded steering wheel for racing feel and easier access to
all adjustments
Easy binding with the HPI RF-40 and RF-45 receiver
Adjustable failsafe settings with the RF-45 receiver
End Point Adjustment (EPA) for steering and throttle
Steering dual rate adjustment
Throttle and steering trim adjustment
Small door on rear of transmitter for screwdriver storage
Blinking low battery indicator
LiPo or NiMH battery type switch on receiver that sets low voltage
fail safe cut-off limit
YOU WILL RECEIVE:
HPI 2.4GHz TF-45 Transmitter with Instruction Manual
RF-45 Receiver, HPIL5422
REQUIREMENTS:
Four AA batteries
Servos of modeler's choice
On-Off Switch
SPECIFICATIONS:
Transmitter-
Frequency: 2.4GHz
Radio Wave Type: FHSS
Weight: 15.9oz (450g)
RF-45 Receiver-
Frequency: 2.4GHz
Fail Safe: LiPo or NiMH battery type switch
Battery Requirement: 6V NiMH or 7.4V 2S LiPo
Dimensions: 1.3 x 1.02 x 0.51 (33 x 26 x 13mm)
Weight: 0.28oz (8g)
jxs 12/16/15
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov