HPI HPI15101

This is the Nitro Star .15 cu in (2.49cc)T-15 Pull Start Engine from HPI Racing This is the standard engine currently (1/15/04) being put in the Nitro MT 2, Rush Evo, & Nitro 3 Evo kits. ABC construction 6mm Dual Needle Rotary carb Side exhaust Powder black case Tall powder gray heatsink head (10 fins) Aggressive porting Standard shaft Glow plug, brass flywheel collet, air cleaner, instructions & decals Glow fuel and glow starter Carburetor: Rotary type, 6mm Ports: 3 Weight: 10.2oz (290g) Displacement: .15 cu in (2.49cc) Horse Power: 1.2hp @ 29,000 RPM Bore: 15.0mm Stroke: 13.6mm Distance between mounting holes front to back: 0.43" (11mm) Distance between mounting holes side to side: 1.2" (31.5mm) Overall width including mounting flanges 1.6" (40mm) Overall height from bottom of crancase to top of head: 3.9" (100mm) Overall length from back of recoil to end of shaft: 3.5" (88mm) Diameter of head at largest point: 1.9" (49mm) Length of shaft: 0.75" (19mm) Length of threaded portion of shaft: 0.47" (12mm) Distance between exhaust mounting holes: 1.1" (27.2mm) This engine also includes mounting holes in the bottom of the crankcase. The specs for these are as follows. Distance between mounting holes side to side: 0.72" (18.2mm) Distance between mounting holes front to rear: 0.83" (21mm) This engine will also accept the #87120 (HPIP8720) HPI Roto Start System. This engine will easily & directly fit into any nitro car or truck that accepts small block (.12-.15) engines with pull starters. per HPI tjt 11504 ir/jxs updt jxs 4/20/05 &