HPI HPI112868

HPI Racing brand Glow Powered, 2.4GHz Radio Controlled, 1/8 Scale, Ready to Run
Ken Block WR8 3.0 F0RD Fiesta Rally Car from HPI.

Chassis: 0.12 (3mm) thick natural finish aluminum with plastic side
guards
Drive: Four wheel shaft
Radio: HPI TF-40 3-channel 2.4GHz with dual rate steering, all
channel servo reverse and waterproof analog servo
Engine: HPI Nitro Star High Output G3.0 with pull starter, silde
valve carburetor steel flywheel, 2-stage foam air filter, and
2-shoe racing type clutch
Exhaust: Aluminum tuned pipe, black in color
Fuel Tank: 2.5oz (75cc)
Differentials: Three, bevel gear type
Shocks: Oil-filled, coil over composite body with rear shock mud
guards
Shock Towers: Aluminum 0.12 (3mm) thick
Brake: Two steel discs
Suspension: Front and rear sway bars, composite lower suspension arms
and solid upper links for easy adjustment
Tires: Rallycross Spec 1.24 (31.5mm) wide, 3.1 (80mm) diameter
with Foam Inserts
Wheels: Blue plastic Rallycross spec 1.25 (33mm) wide, 1.9 (48mm)
diameter, 12mm hex size
Ball Bearings: Full set
Body: Ken Block F0RD Fiesta H. F. H. V. trimmed and painted, with all
sponsor decals applied
Bumper: Front foam with plastic raised skidplate that allows car to
slide over objects in the road
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-Adjustable camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited through manufacturer, valid only in USA,
Canada and South America

HPI RTR WR8 3.0 Rally Car with 2.4GHz Radio, Steering Servo, Engine,
Eight AA Batteries, Painted Body and Instruction Manual

Glow Fuel: Car blend with 20-25% nitro content
Glow Starter with Battery, Fuel Bottle, Filter Oil, Flat Blade
Screwdriver, Track and Maintenance Equipment

Vehicle-
length: 19.1 (485mm)
width: 8.9 (227mm)
height: 6.8 (172mm)
Wheelbase: 11.8 (300mm)
Body-
length: 18.9 (480mm)
width: 8 (203mm) behind front wheels, narrowest point
9.1 (232mm) at rear wheels, widest point
height: 6 (153mm)
COMMENTS
For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 5x10mm Front Hubs 2 DTXC1535
4 5x8mm Rear Hubs 2 DTXC1523
2 5x11mm Clutch 1 DTXC1547
6 10x15mm Differentials 3 DTXC1595
2 5x10mm Front Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
jxs 04/07/14

This item is out of stock