HPI HPI105978

This is the 1/10 scale electric powered, 2.4GHz radio controlled, ready to run HPI E10 on-road Falken Tire 2011 F0RD Mustang GT Drift Car. Chassis: Bathtub type 0.078" (2mm) thick with quick change battery holder and adjustable motor and radio equipment positions to easily convert from street/touring to drift driving with no extra parts to buy Drive: Four wheel shaft Radio: 2.4GHz 2-channel pistol grip Electronic Speed Control: SC-15WP with reverse Motor HPI Saturn 27T 540 size, HPIC1144 Charger: AC wall type Battery: HPI Plazma 7.2V 2000mAh NiMH with Standard connector Shocks: Composite bodied Gearboxes: Closed Differentials: Front and rear bevel-type Transmission: Single-speed Tires: Falken Azenis RT-615K T-drift 2.48" (63mm) diameter, 1.02" (26mm) wide Wheels: HRE, white center with chrome inner rim 2.08" (53mm) diameter, 1.02" (26mm) wide Bumpers: Front, foam Body: Pre-painted 2011 F0RD Mustang GT with, adjustable body mounts to accomodate a large variety of touring car bodies Suspension: Full-time independent Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Bell-crank type with servo saver HPI E10 on-road 2011 Falken Tire F0RD Mustang GT with painted body, 2.4GHz radio, ESC, battery, charger, wheels, tires, 27T motor six AA batteries and manual Misc. Items: Building and track equipment VEHICLE- Length: 14.8" (375mm) Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm) Height: 4.25" (107.95mm) Weight: 2.8 lbs (1270g) without body Wheelbase: 10" (255mm) Drive Ratio: 7.48:1 Tread: Front and rear 6.25" (158.75mm)(side-to-side at wheel centers) Front Track: 7.25" (184.15mm) Rear Track: 7.25" (184.15mm) Spur Gear: 65T Tires- Front and rear: 2.48" x 1.02" (63x26mm) BODY- Length: 18.5" (470mm) Width: 8" (203mm) at rear wheels (widest point) 7.5" (190.5mm) behind from wheels (thinnest point) Height: 4.25" (107.95mm) For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 12x18x14 Center drive shaft 1 DTXC1597 Body pictured on the box is painted blue and green jxs 07/25/11 ir/jxs &