HPI HPI110663

HPI Racing brand brushless electric powered, 2.4GHz radio controlled, ready to run
1/10 scale Bullet MT Flux Monster Truck from HPI.
**Additional Technical Info Will Be Added When It Becomes Available. **

Chassis: 6061 aluminum double deck 0.12 (3mm) thick
Drive: Four wheel shaft, with steel outdrives and axles
Motor: HPI MMH-4000, 4000Kv brushless with black anodized heat sink
case
ESC: HPI Flux EMH-3S waterproof, brushless with T-plug style connector battery plug
and cooling fan, can be customized with the #101280 PC Professional
Program Card (not included)
Radio: 2.4GHz with failsafe
Steering Servo: SF-10W waterproof
Electronics Compartment: Waterproof
Differentials: Bevel Gear type with four internal gears for increased
durability
Shocks: Eight oil-filled with captured type mounting on suspension
arm for extra durability
Suspension: Extra long arms for greater stability and thick
suspension pins for greater resistance against crash damage
Spur Gear: 54 tooth plastic
Slipper Clutch: Double pad design for extra drivetrain protection
Body: Painted and trimmed
Bumpers: Front and rear, plastic construction
Tires: All terrain 2.6 (67mm) wide, 4.8 (124mm) diameter
Wheels: Five Spoke black chrome finish, 14mm hex, 2.2 (56mm) wide
3.2 (82mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Ball Bearings: Full set
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Warranty: Two year limited beginning at date of purchase. Valid only
in US, Canada and South America. Not intended for use in the EU.

Bullet MT Flux Monster Truck with 2-channel 2.4GHz Radio, brushless
Motor, ESC, painted Body, 4 AA Cells and Instruction manual

Battery: 7.2V NiMh 6-cell stick pack or 7.4V LiPo battery with T-plug style connector
Battery Charger: To match selected battery
Maintenance and Track equipment

Vehicle-
length: 16.4 (417mm)
width: 13.2 (336mm)
height: 6.3 (160mm)
Track: 10.3 (263mm) outer edges of tires side-to-side
Wheelbase: 10.7 (272mm)
Body-
length: 16.3 (415mm)
width: 6.7 (171mm)
height: 4.8 (122mm)

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Gear 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10 Rear Diff Case 1 DTXC1535
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535
jxs 11/24/15
ir/jxs
updt jxs 02/05/14