HPI HPI110660
$299.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1:10 Bullet St 3.0 Nitro 4WD RTR
HPI Racing brand radio controlled, glow powered, ready to run, 1/10 scale
Bullet ST 3.0 Stadium Truck from HPI.
rear skid plates and aluminum center brace
Drive: Four wheel sealed shaft drive
Radio: 2.4GHz with end point adjustments, dual rates,
servo reverse, waterproof SF-10W steering and throttle servos
Engine: Nitro Star G3.0 with pull starter, two stage air filter with
rain cover, two needle composite body slide valve carburetor, and
ABC liner construction, Aluminum piston with Brass cylinder
liner that is Chrome plated
Exhaust: Tuned aluminum pipe
Clutch: Two piece racing with 13 tooth steel clutch bell
Fuel Tank: 2.5oz (75cc)
Shocks: Eight oil-filled
Differentials: Bevel gear
Brake: Single drilled steel disc
Ball Bearings: Full set, rubber sealed
Body: Trimmed and painted
Suspension: Extra long arms with steel turnbuckle links
Slipper Clutch: Dual pad, adjustable
Spur Gear: 54 tooth plastic
Wheels: 5-spoke black chrome, 14mm hex, 2.2 (56mm) wide, 3.2
(82mm) diameter
Tires: HPI Ammunition all terrain 2.6 (67mm) wide, 4.8 (124mm)
diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Warranty: Two year limited beginning at date of purchase. Valid only
in US, Canada and South America. Not intended for use in the EU.
Radio, painted Body, 8 AA cells and Instruction Manual
Fuel bottle, glow starter, maintenance and track equipment
length: 16.4 (417mm)
width: 13.2 (336mm)
height: 6.3 (160mm) adjustable
Wheelbase: 10.7 (272mm)
Track: 10.3 (263mm) outer edges of tires side-to-side
Body;
length: 16.1 (409mm)
width: 6.7 (170mm)
height: 4.4 (112mm)
Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Gear 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
2 5x10mm Clutch 1 DTXC1535
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535
jxs 10/19/11
ir/jxs
Bullet ST 3.0 Stadium Truck from HPI.
FEATURES:
Chassis: 6061 aluminum 0.12 (3mm) thick double deck with front andrear skid plates and aluminum center brace
Drive: Four wheel sealed shaft drive
Radio: 2.4GHz with end point adjustments, dual rates,
servo reverse, waterproof SF-10W steering and throttle servos
Engine: Nitro Star G3.0 with pull starter, two stage air filter with
rain cover, two needle composite body slide valve carburetor, and
ABC liner construction, Aluminum piston with Brass cylinder
liner that is Chrome plated
Exhaust: Tuned aluminum pipe
Clutch: Two piece racing with 13 tooth steel clutch bell
Fuel Tank: 2.5oz (75cc)
Shocks: Eight oil-filled
Differentials: Bevel gear
Brake: Single drilled steel disc
Ball Bearings: Full set, rubber sealed
Body: Trimmed and painted
Suspension: Extra long arms with steel turnbuckle links
Slipper Clutch: Dual pad, adjustable
Spur Gear: 54 tooth plastic
Wheels: 5-spoke black chrome, 14mm hex, 2.2 (56mm) wide, 3.2
(82mm) diameter
Tires: HPI Ammunition all terrain 2.6 (67mm) wide, 4.8 (124mm)
diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Warranty: Two year limited beginning at date of purchase. Valid only
in US, Canada and South America. Not intended for use in the EU.
YOU WILL RECEIVE:
RTR HPI Bullet ST 3.0 Stadium Truck with Engine, Exhaust, 2.4GHzRadio, painted Body, 8 AA cells and Instruction Manual
REQUIREMENTS:
Glow Fuel: Car blend nitromethane with 20-25% nitro contentFuel bottle, glow starter, maintenance and track equipment
SPECIFICATIONS:
Vehicle;length: 16.4 (417mm)
width: 13.2 (336mm)
height: 6.3 (160mm) adjustable
Wheelbase: 10.7 (272mm)
Track: 10.3 (263mm) outer edges of tires side-to-side
Body;
length: 16.1 (409mm)
width: 6.7 (170mm)
height: 4.4 (112mm)
COMMENTS:
For replacement ball bearings use: Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Gear 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
2 5x10mm Clutch 1 DTXC1535
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535
jxs 10/19/11
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov