HPI HPI954

This is the 1/10 scale electric powered, radio controlled, ready-to-run
2WD HPI Dash with BWM M3 GT body on-road car.
This is an entry-level car.

FEATURES:

Chassis: Black plastic enclosed chassis
Body: 200mm pre-painted gray lexan
Motor: 380
Radio: Translucent blue AM 2-channel pistol radio with steering
trims and three different selectable channels labeled A, B, and C.
Shocks: Coil-over friction type
Gearbox: Sealed
Differentials: Planetary gear
Transmission: Single speed
Tires: Pre-mounted X-Pattern
Wheels: 12 spoke
Speed Control: Integrated with the receiver (not upgradeable)
Suspension: Flexing rear plate, straight rear axle

INCLUDES:

HPI RTR Dash, body, body pins, pistol grip transmitter, antenna tube,
7.2V stick pack, wall charger with Tamiya connector, 9V Tx battery,
and instructions.
_

REQUIRES:

Charging the pack, installing antennas, and installing 9V battery.

SPECS:

VEHICLE-
Length: 13.8" (350mm)
Width: 7.48" (190mm)
Height: 3.54" (90mm)
Wheelbase: 10.2" (260mm)
Front Track: 6.7" (170mm)
Rear Track: 6.7" (170mm)
Gear Ratio: Not provided
Tires- Front: 26mm x 60mm
Rear: 26mm x 60mm
BODY-
Length: 16.9" (430mm)
Width: 7.9" (200mm) at rear wheels (widest point)
Height: 3.5" (90mm)

COMMENTS:

Although it is not stated by HPI, it appears that the shocks can be
upgraded with standard sized touring car shocks.
The tires and wheels are 26mm touring car sized, so any
manufacturers sedan wheels and tires will fit this vehicle.
The body can be replaced with any 200mm touring car design. The
wheelbase is a standard size.
ajw 07/12/03
ir/jxs

this information was sourced from Great Planes Model Distributors