HPI HPI115383

HPI Racing brand Electric Powered, 2.4GHz Radio Controlled, 1/8 Scale,
Ready to Run '15 WR8 Flux Ken Block F0RD Fiesta ST RX43 Rally Car from HPI.
FEATURES:
Chassis: 0.12 (3mm) thick silver anodized aluminum with composite
front and rear braces and plastic side dirt guards
Drive: Four wheel shaft
Radio: 2.4GHz 2-channel system with steering dual rate steering and
throttle, and waterproof analog steering servo
Motor: Flux Vektor 4000Kv brushless
ESC: Flux Vapor Pro with reverse, cooling fan and fully programmable
with the #100573 Castle Link USB Programmer, HPIC0573 (not
included)
Differentials: Three, adjustable bevel gear type, oil filled
Shocks: Oil-filled, composite body with rear mud guards
Shock Towers: 0.12 (3mm) thick aluminum
Suspension: Front and rear sway bars, composite lower suspension arms
and solid upper links
Tires: WR8 Rally Tarmac c, 1.4 (35mm) wide, 3.1 (80mm) diameter
2.2 (56mm) inner diameter
Wheels: Fifteen52 Turbomac, white in color, 1.4 (35mm) wide,
2.2 (56mm) diameter, 12mm hex
Ball Bearings: Full set
Pinion Gear: 15 tooth
Spur Gear: 46 tooth composite
Body: Trimmed and painted with all sponsor decals applied
Bumper: Front foam with plastic raised skidplate that allows car to
slide over objects in the road
Ball Bearings: Full set, rubber sealed
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-Adjustable camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited through manufacturer, valid only in USA,
Canada and South America
YOU WILL RECEIVE:
HPI RTR WR8 Flux Ken Block F0RD Fiesta Rally Car with 2.4GHz Radio
System, ESC, Brushless Motor, Body, 4 AA cells for Transmitter and
Instruction Manual
REQUIREMENTS:
LiPo Battery: 2-3S LiPo with at least 25C rating and 3500mAh and
T-plug Female plug
Battery Charger: Compatible with selected battery
LiPo Charging Bag
Building and track equipment
SPECIFICATIONS:
Vehicle-
Length: 19.1 (485mm)
Width: 8.9 (227mm)
Height: 6.8 (172mm)
Wheelbase: 11.8 (300mm)
Body-
Length: 18.9 (480mm)
Width: 8 (203mm) behind front wheels, narrowest point
9.1 (232mm) at rear wheels, widest point
Height: 6 (153mm)
COMMENTS
For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 5x10mm Front Hubs 2 DTXC1535
4 5x8mm Rear Hubs 2 DTXC1523
6 10x15mm Differentials 3 DTXC1595
2 5x10mm Front Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
jxs 11/13/15
ir/jxs