HPI HPI114712

$49.49
HPI logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
alternate part numbers:
SC-3SWP2 Waterproof ESC
HPI HPI114712 - SC-3SWP2 Waterproof ESC

HPI Racing brand HPI Sc-3sWP2 Waterproof Electronic Speed Control.
FEATURES:

For use with brushed motors down to 8 turns
Suitable for all types of 1/10 scale vehicles
May be powered by 2-3S LiPos, or 5-9 cell NiMh NiCd batteries by
changing jumper plugs
Reverse function enabled/disabled with the included jumper plugs
Fail safe protection if throttle signal is lost for more than 0.1
second
Automatic throttle range calibration
Low voltage cutoff
Built-in capacitors prevent signal loss from low voltage
YOU WILL RECEIVE:

HPI Sc-3sWP2 ESC with Tamiya type Battery Connector, Female Bullet
Motor Connectors, On/Off Switch, Receiver Connector and
Instructions
SPECIFICATIONS:

Forward Continuous Current: 40A
Forward Burst Current: 180A
Reverse Continuous Current: 20A
Reverse Burst Current: 90A
Input: 2-3S LiPo, 5-9 cell NiMh /NiCd
Motor Limit: 2S LiPo or 6 cell NiMh 540 or 550-size brushed motor
greater than or equal to 12 turn, RPM over 30, 000 at 7.2v
Motor Limit: 3S LiPo or 9 cell NiMh : 540 or 550-size brushed motor
greater than or equal to 18 turn, RPM over 20, 000 at 7.2v
Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm
PWM Frequency: 1 KHz
DIMENSIONS:
1.4 x 1.2 x 0.69 (36 x 29.5 x 17.5mm)
Weight: 1.44oz (41g)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov