HPI HPI107940
$395.09
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Fuelie K26 Engine
This is the HPI Fuelie K26 1.6 cu in (26cc) Gasoline Engine used with the
Baja 5B, 5T and 5SC series.
HPI Fuelie K26 1.6 cu in (26cc) Gasoline Engine with NGK CMR 7H spark
plug, air filter housing with two foam filters, muffler, plug
wrench and instruction manual
Carburetor Settings-IMPORTANT Do not adjust the carburetor before
break-in. The carburetor is set slightly rich from the factory.
If Top Speed is Slow-turn high-speed needle a maximum of 1/4 turn
from factory setting.
If vehicle accelerates slowly, turn the low-speed needle a maximum
of 1/4 turn clockwise from factory setting
Rotate high and low speed needles only a 1/16 of a turn at a time.
Do not make large adjustments.
Spark Plug Gap: 0.6-0.7mm
Displacement: 1.6 cu in (25.4cc)
Maximum Power: 2.7 horsepower @ 13,500RPM
Maximum Torque: 0.165/10500 kg.m/RPM
Maximum RPM at non-load: 22000 RPM
Weight: 4.5lbs (2.04kg)
Length: 6.2" (158mm)
Width: 11.2" (286mm)
Height: 7.8" (199mm)
jxs 11/20/13
ir/jxs
&
FEATURES:
Pull starter
Primer, choke and kill switch
Two stage foam air filter
Two year limited warranty, USA, Canada and South America only
YOU WILL RECEIVE:
REQUIREMENTS:
Unleaded Gasoline: 87-93 octane, mix gasoline and two cycle oil
at 25:1 ratio
Pre mix 2 cycle oil
SPECIFICATIONS:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov